Move CONFIG_PANIC_HANG to Kconfig

[J-u-boot.git] / include / configs / P1010RDB.h

diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 2dee5ac01c4ded1ff85828ba233614fce10fa257..6a444aea61a55f718d38f36bf6c160757ce7dffe 100644 (file)
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -140,8 +140,6 @@
 #define CONFIG_FSL_PCIE_RESET          /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
 
-#define CONFIG_CMD_PCI
-
 /*
  * PCI Windows
  * Memory space is mapped 1-1, but I/O space must start from 0.
@@ -207,7 +205,6 @@
 #define CONFIG_L2_CACHE                        /* toggle L2 cache */
 #define CONFIG_BTB                     /* toggle branch predition */
 
-#define CONFIG_ADDR_STREAMING          /* toggle addr streaming */
 
 #define CONFIG_ENABLE_36BIT_PHYS
 
@@ -218,7 +215,6 @@
 
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x1fffffff
-#define CONFIG_PANIC_HANG              /* do not reset board on panic */
 
 /* DDR Setup */
 #define CONFIG_SYS_DDR_RAW_TIMING
@@ -354,9 +350,6 @@ extern unsigned long get_sdram_size(void);
 
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITION
-#define MTDIDS_DEFAULT                 "nand0=ff800000.flash"
-#define MTDPARTS_DEFAULT               \
-       "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
 
 #define CONFIG_SYS_NAND_CSPR   (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
                                | CSPR_PORT_SIZE_8      \
@@ -640,9 +633,7 @@ extern unsigned long get_sdram_size(void);
 #endif /* CONFIG_TSEC_ENET */
 
 /* SATA */
-#define CONFIG_FSL_SATA
 #define CONFIG_FSL_SATA_V2
-#define CONFIG_LIBATA
 
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_SYS_SATA_MAX_DEVICE     2
@@ -711,11 +702,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_LOADS_ECHO              /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change */
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \
@@ -730,16 +716,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-                                               /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 64 MB of memory, since this is
@@ -769,8 +745,6 @@ extern unsigned long get_sdram_size(void);
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-#undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
        "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
        "netdev=eth0\0"                                         \