powerpc/85xx: configure autocompletion support

[J-u-boot.git] / include / configs / MPC8568MDS.h

diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 58ff52b33fdef8a4241739d975a83f0f3071ec28..ea7a134b8d52c7de6ad6cd8d128af5237c8a2726 100644 (file)
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -44,13 +44,6 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_FSL_LAW         1       /* Use common FSL init code */
 
-/*
- * When initializing flash, if we cannot find the manufacturer ID,
- * assume this is the AMD flash associated with the MDS board.
- * This allows booting from a promjet.
- */
-#define CONFIG_ASSUME_AMD_FLASH
-
 #ifndef __ASSEMBLY__
 extern unsigned long get_clock_freq(void);
 #endif                                           /*Replace a call to get_clock_freq (after it is implemented)*/
@@ -82,9 +75,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
 #define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
 
-#define CONFIG_SYS_PCI1_ADDR           (CONFIG_SYS_CCSRBAR+0x8000)
-#define CONFIG_SYS_PCIE1_ADDR          (CONFIG_SYS_CCSRBAR+0xa000)
-
 /* DDR Setup */
 #define CONFIG_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
@@ -187,42 +177,19 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_LBC_LSRT            0x20000000      /* LB sdram refresh timer */
 #define CONFIG_SYS_LBC_MRTPR           0x00000000      /* LB refresh timer prescal*/
 
-/*
- * LSDMR masks
- */
-#define CONFIG_SYS_LBC_LSDMR_RFEN      (1 << (31 -  1))
-#define CONFIG_SYS_LBC_LSDMR_BSMA1516  (3 << (31 - 10))
-#define CONFIG_SYS_LBC_LSDMR_BSMA1617  (4 << (31 - 10))
-#define CONFIG_SYS_LBC_LSDMR_RFCR16    (7 << (31 - 16))
-#define CONFIG_SYS_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
-#define CONFIG_SYS_LBC_LSDMR_ACTTORW7  (7 << (31 - 22))
-#define CONFIG_SYS_LBC_LSDMR_ACTTORW6  (6 << (31 - 22))
-#define CONFIG_SYS_LBC_LSDMR_BL8       (1 << (31 - 23))
-#define CONFIG_SYS_LBC_LSDMR_WRC4      (0 << (31 - 27))
-#define CONFIG_SYS_LBC_LSDMR_CL3       (3 << (31 - 31))
-
-#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
-#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
-#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
-#define CONFIG_SYS_LBC_LSDMR_OP_MRW    (3 << (31 - 4))
-#define CONFIG_SYS_LBC_LSDMR_OP_PRECH  (4 << (31 - 4))
-#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
-#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
-#define CONFIG_SYS_LBC_LSDMR_OP_RWINV  (7 << (31 - 4))
-
 /*
  * Common settings for all Local Bus SDRAM commands.
  * At run time, either BSMA1516 (for CPU 1.1)
  *                  or BSMA1617 (for CPU 1.0) (old)
  * is OR'ed in too.
  */
-#define CONFIG_SYS_LBC_LSDMR_COMMON    ( CONFIG_SYS_LBC_LSDMR_RFCR16           \
-                               | CONFIG_SYS_LBC_LSDMR_PRETOACT7        \
-                               | CONFIG_SYS_LBC_LSDMR_ACTTORW7 \
-                               | CONFIG_SYS_LBC_LSDMR_BL8              \
-                               | CONFIG_SYS_LBC_LSDMR_WRC4             \
-                               | CONFIG_SYS_LBC_LSDMR_CL3              \
-                               | CONFIG_SYS_LBC_LSDMR_RFEN             \
+#define CONFIG_SYS_LBC_LSDMR_COMMON    ( LSDMR_RFCR16          \
+                               | LSDMR_PRETOACT7       \
+                               | LSDMR_ACTTORW7        \
+                               | LSDMR_BL8             \
+                               | LSDMR_WRC4            \
+                               | LSDMR_CL3             \
+                               | LSDMR_RFEN            \
                                )
 
 /*
@@ -300,9 +267,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_OF_BOARD_SETUP          1
 #define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
-#define CONFIG_SYS_64BIT_VSPRINTF      1
-#define CONFIG_SYS_64BIT_STRTOUL       1
-
 /*
  * I2C
  */
@@ -310,7 +274,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_HARD_I2C                /* I2C with hardware support*/
 #undef CONFIG_SOFT_I2C                 /* I2C bit-banged */
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x52
 #define CONFIG_SYS_I2C_SLAVE           0x7F
@@ -367,7 +330,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK16
 #define CONFIG_SYS_UEC1_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR       7
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
 #endif
 
 #define CONFIG_UEC_ETH2         /* GETH2 */
@@ -378,7 +342,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK16
 #define CONFIG_SYS_UEC2_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR       1
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
 #endif
 #endif /* CONFIG_QE */
 
@@ -453,6 +418,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -465,7 +431,8 @@ extern unsigned long get_clock_freq(void);
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING         /* Command-line editing */
+#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
+#define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 #define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
@@ -480,10 +447,10 @@ extern unsigned long get_clock_freq(void);
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 16 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions