nxp: Migrate a number of DDR related symbols to Kconfig

[J-u-boot.git] / configs / ls1021aqds_nand_defconfig

diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig
index 1cd669688c0e2b654b7e59869d350826a2277913..a7eb20e40c6900f685eb72dbd98ecd79369de608 100644 (file)
--- a/configs/ls1021aqds_nand_defconfig
+++ b/configs/ls1021aqds_nand_defconfig
@@ -4,14 +4,20 @@ CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x140000
+CONFIG_SYS_I2C_MXC_I2C1=y
+CONFIG_SYS_I2C_MXC_I2C2=y
+CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
 CONFIG_SPL_TEXT_BASE=0x10000000
+CONFIG_FSL_USE_PCA9547_MUX=y
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
 CONFIG_AHCI=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -21,25 +27,25 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND_BOOT"
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_MISC_INIT_R=y
+CONFIG_ID_EEPROM=y
 CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
 CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_SPL_WATCHDOG=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -49,7 +55,6 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 # CONFIG_SPL_EFI_PARTITION is not set
@@ -60,9 +65,14 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_SYS_FSL_DDR3=y
+CONFIG_DDR_ECC=y
+CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
 CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
@@ -74,19 +84,13 @@ CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
+CONFIG_NVME=y
 CONFIG_PCI=y
-CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
-# CONFIG_VIDEO_FSL_DCU_FB is not set
-# CONFIG_VIDEO is not set
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_CMD_NVME=y
-CONFIG_NVME=y