configs: Resync with savedefconfig

[J-u-boot.git] / configs / pm9g45_defconfig

diff --git a/configs/pm9g45_defconfig b/configs/pm9g45_defconfig
index c5a20977137f5d94a5001fc31788c6d813693f79..3b2bf6c4d7a2e9413eeacf4431a627a41226e85e 100644 (file)
--- a/configs/pm9g45_defconfig
+++ b/configs/pm9g45_defconfig
@@ -6,26 +6,27 @@ CONFIG_SYS_MALLOC_LEN=0x80000
 CONFIG_TARGET_PM9G45=y
 CONFIG_ATMEL_LEGACY=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x70003f00
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
-CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_SYS_LOAD_ADDR=0x70000000
 CONFIG_DEBUG_UART=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x70003f00
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="fbcon=rotate:3 console=tty0 console=ttyS0,115200 root=/dev/mtdblock4 mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,1664k(env),2M(linux)ro,-(root) rw rootfstype=jffs2"
+CONFIG_BOOTARGS="console=ttyS0,115200 mtdparts=atmel_nand:128k(bootstrap)ro,640k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),8M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
 CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000"
+CONFIG_BOOTCOMMAND="nand read 0x70000000 0x180000 0x880000; nand read 0x70080000 0x200000 0x800000; bootz 0x70080000 - 0x70000000"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_SYS_CBSIZE=256
 CONFIG_SYS_PBSIZE=281
 # CONFIG_CMD_BDI is not set
@@ -52,7 +53,6 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
-CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT=y
 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_MACB=y