configs: Resync with savedefconfig

[J-u-boot.git] / configs / at91sam9263ek_dataflash_cs0_defconfig

diff --git a/configs/at91sam9263ek_dataflash_cs0_defconfig b/configs/at91sam9263ek_dataflash_cs0_defconfig
index 02e91148cef127d2d9e6d49cd173c65f30af8efe..a19f309c4a943be476f2e30ec39abc3c58961771 100644 (file)
--- a/configs/at91sam9263ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9263ek_dataflash_cs0_defconfig
@@ -1,10 +1,17 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x21F00000
 CONFIG_TARGET_AT91SAM9263EK=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH"
 CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
@@ -13,17 +20,19 @@ CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
@@ -31,18 +40,24 @@ CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_DATAFLASH=y
 CONFIG_DM_ETH=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
-CONFIG_DEBUG_UART=y
 CONFIG_DEBUG_UART_ATMEL=y
-CONFIG_DEBUG_UART_BASE=0xffffee00
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_TIMER=y
+CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y