configs: e850-96: Disable PSCI reset

[J-u-boot.git] / configs / nanopi-r5c-rk3568_defconfig

diff --git a/configs/nanopi-r5c-rk3568_defconfig b/configs/nanopi-r5c-rk3568_defconfig
index f5a472d03d786d36810c718ce205ee5c1e411974..4a43b17ccb16cdf0aa5e36c30f51fb4aaecb71aa 100644 (file)
--- a/configs/nanopi-r5c-rk3568_defconfig
+++ b/configs/nanopi-r5c-rk3568_defconfig
@@ -3,21 +3,12 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
-CONFIG_DEFAULT_DEVICE_TREE="rk3568-nanopi-r5c"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-nanopi-r5c"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
@@ -30,12 +21,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-nanopi-r5c.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
@@ -49,7 +35,6 @@ CONFIG_CMD_REGULATOR=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIVE=y
 CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
-CONFIG_SPL_DM_WARN=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPL_REGMAP=y
 CONFIG_SPL_SYSCON=y