menu "Environment"
-choice
- prompt "Select the location of the environment"
- default ENV_IS_IN_MMC if ARCH_SUNXI
- default ENV_IS_IN_MMC if ARCH_UNIPHIER
- default ENV_IS_IN_MMC if ARCH_EXYNOS4
- default ENV_IS_IN_MMC if MX6SX || MX7D
- default ENV_IS_IN_MMC if TEGRA30 || TEGRA124
- default ENV_IS_IN_MMC if TEGRA_ARMV8_COMMON
- default ENV_IS_IN_FLASH if ARCH_CINTEGRATOR
- default ENV_IS_IN_FLASH if ARCH_INTEGRATOR_CP
- default ENV_IS_IN_FLASH if M548x || M547x || M5282 || MCF547x_8x
- default ENV_IS_IN_FLASH if MCF532x || MCF52x2
- default ENV_IS_IN_FLASH if MPC86xx || MPC83xx
- default ENV_IS_IN_FLASH if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641
- default ENV_IS_IN_FLASH if SH && !CPU_SH4
- default ENV_IS_IN_SPI_FLASH if ARMADA_XP
- default ENV_IS_IN_SPI_FLASH if INTEL_BAYTRAIL
- default ENV_IS_IN_SPI_FLASH if INTEL_BROADWELL
- default ENV_IS_IN_SPI_FLASH if NORTHBRIDGE_INTEL_IVYBRIDGE
- default ENV_IS_IN_SPI_FLASH if INTEL_QUARK
- default ENV_IS_IN_SPI_FLASH if INTEL_QUEENSBAY
- default ENV_IS_IN_FAT if ARCH_BCM283X
- default ENV_IS_IN_FAT if MMC_OMAP_HS && TI_COMMON_CMD_OPTIONS
- default ENV_IS_NOWHERE
- help
- At present the environment can be stored in only one place. Use this
- option to select the location. This is either a device (where the
- environemnt information is simply written to a fixed location or
- partition on the device) or a filesystem (where the environment
- information is written to a file).
-
config ENV_IS_NOWHERE
bool "Environment is not stored"
+ depends on !ENV_IS_IN_EEPROM
+ depends on !ENV_IS_IN_EXT4
+ depends on !ENV_IS_IN_FAT
+ depends on !ENV_IS_IN_FLASH
+ depends on !ENV_IS_IN_MMC
+ depends on !ENV_IS_IN_NAND
+ depends on !ENV_IS_IN_NVRAM
+ depends on !ENV_IS_IN_ONENAND
+ depends on !ENV_IS_IN_REMOTE
+ depends on !ENV_IS_IN_SPI_FLASH
+ depends on !ENV_IS_IN_UBI
+ default y
help
Define this if you don't want to or can't have an environment stored
- on a storage medium. In this case the environemnt will still exist
+ on a storage medium. In this case the environment will still exist
while U-Boot is running, but once U-Boot exits it will not be
stored. U-Boot will therefore always start up with a default
environment.
-config ENV_IS_IN_DATAFLASH
- bool "Environment in dataflash"
- depends on !CHAIN_OF_TRUST
- help
- Define this if you have a DataFlash memory device which you
- want to use for the environment.
-
- - CONFIG_ENV_OFFSET:
- - CONFIG_ENV_ADDR:
- - CONFIG_ENV_SIZE:
-
- These three #defines specify the offset and size of the
- environment area within the total memory of your DataFlash placed
- at the specified address.
-
config ENV_IS_IN_EEPROM
bool "Environment in EEPROM"
depends on !CHAIN_OF_TRUST
config ENV_IS_IN_FAT
bool "Environment is in a FAT filesystem"
depends on !CHAIN_OF_TRUST
+ default y if ARCH_BCM283X
+ default y if ARCH_SUNXI && MMC
+ default y if MMC_OMAP_HS && TI_COMMON_CMD_OPTIONS
+ select FS_FAT
select FAT_WRITE
help
Define this if you want to use the FAT file system for the environment.
- - CONFIG_FAT_WRITE:
- This must be enabled. Otherwise it cannot save the environment file.
+config ENV_IS_IN_EXT4
+ bool "Environment is in a EXT4 filesystem"
+ depends on !CHAIN_OF_TRUST
+ select EXT4_WRITE
+ help
+ Define this if you want to use the EXT4 file system for the environment.
config ENV_IS_IN_FLASH
bool "Environment in flash memory"
depends on !CHAIN_OF_TRUST
+ default y if ARCH_CINTEGRATOR
+ default y if ARCH_INTEGRATOR_CP
+ default y if M548x || M547x || M5282 || MCF547x_8x
+ default y if MCF532x || MCF52x2
+ default y if MPC86xx || MPC83xx
+ default y if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641
+ default y if SH && !CPU_SH4
help
Define this if you have a flash device which you want to use for the
environment.
config ENV_IS_IN_MMC
bool "Environment in an MMC device"
depends on !CHAIN_OF_TRUST
+ depends on MMC
+ default y if ARCH_EXYNOS4
+ default y if MX6SX || MX7D
+ default y if TEGRA30 || TEGRA124
+ default y if TEGRA_ARMV8_COMMON
help
Define this if you have an MMC device which you want to use for the
environment.
provision.
config ENV_IS_IN_REMOTE
- bool "Environment is in remove memory space"
+ bool "Environment is in remote memory space"
depends on !CHAIN_OF_TRUST
help
Define this if you have a remote memory space which you
config ENV_IS_IN_SPI_FLASH
bool "Environment is in SPI flash"
depends on !CHAIN_OF_TRUST
+ default y if ARMADA_XP
+ default y if INTEL_BAYTRAIL
+ default y if INTEL_BRASWELL
+ default y if INTEL_BROADWELL
+ default y if NORTHBRIDGE_INTEL_IVYBRIDGE
+ default y if INTEL_QUARK
+ default y if INTEL_QUEENSBAY
help
Define this if you have a SPI Flash memory device which you
want to use for the environment.
the environment in. This will enable redundant environments in UBI.
It is assumed that both volumes are in the same MTD partition.
- - CONFIG_UBI_SILENCE_MSG
- - CONFIG_UBIFS_SILENCE_MSG
-
- You will probably want to define these to avoid a really noisy system
- when storing the env in UBI.
-
-endchoice
-
config ENV_FAT_INTERFACE
string "Name of the block device for the environment"
depends on ENV_IS_IN_FAT
+ default "mmc" if ARCH_SUNXI
default "mmc" if TI_COMMON_CMD_OPTIONS || ARCH_ZYNQMP || ARCH_AT91
help
Define this to a string that is the name of the block device.
depends on ENV_IS_IN_FAT
default "0:1" if TI_COMMON_CMD_OPTIONS
default "0:auto" if ARCH_ZYNQMP
+ default "0:auto" if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1
+ default "1:auto" if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1
default "0" if ARCH_AT91
help
Define this to a string to specify the partition of the device. It can
partition table then means device D.
config ENV_FAT_FILE
- string "Name of the FAT file to use for the environemnt"
+ string "Name of the FAT file to use for the environment"
depends on ENV_IS_IN_FAT
default "uboot.env"
help
It's a string of the FAT file name. This file use to store the
environment.
-if ARCH_SUNXI
+config ENV_EXT4_INTERFACE
+ string "Name of the block device for the environment"
+ depends on ENV_IS_IN_EXT4
+ help
+ Define this to a string that is the name of the block device.
+
+config ENV_EXT4_DEVICE_AND_PART
+ string "Device and partition for where to store the environemt in EXT4"
+ depends on ENV_IS_IN_EXT4
+ help
+ Define this to a string to specify the partition of the device. It can
+ be as following:
+
+ "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1)
+ - "D:P": device D partition P. Error occurs if device D has no
+ partition table.
+ - "D:0": device D.
+ - "D" or "D:": device D partition 1 if device D has partition
+ table, or the whole device D if has no partition
+ table.
+ - "D:auto": first partition in device D with bootable flag set.
+ If none, first valid partition in device D. If no
+ partition table then means device D.
+
+config ENV_EXT4_FILE
+ string "Name of the EXT4 file to use for the environment"
+ depends on ENV_IS_IN_EXT4
+ default "uboot.env"
+ help
+ It's a string of the EXT4 file name. This file use to store the
+ environment (explicit path to the file)
+
+if ARCH_ROCKCHIP || ARCH_SUNXI || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
config ENV_OFFSET
hex "Environment Offset"
depends on !ENV_IS_IN_UBI
depends on !ENV_IS_NOWHERE
+ default 0x3f8000 if ARCH_ROCKCHIP
default 0x88000 if ARCH_SUNXI
+ default 0xE0000 if ARCH_ZYNQ
+ default 0x1E00000 if ARCH_ZYNQMP
help
Offset from the start of the device (or partition)
config ENV_SIZE
hex "Environment Size"
- depends on !ENV_IS_NOWHERE
- default 0x20000 if ARCH_SUNXI
+ default 0x40000 if ENV_IS_IN_SPI_FLASH && ARCH_ZYNQMP
+ default 0x20000 if ARCH_SUNXI || ARCH_ZYNQ
+ default 0x8000 if ARCH_ROCKCHIP || ARCH_ZYNQMP || ARCH_VERSAL
help
Size of the environment storage area
+config ENV_SECT_SIZE
+ hex "Environment Sector-Size"
+ depends on !ENV_IS_NOWHERE && (ARCH_ZYNQ || ARCH_ZYNQMP)
+ default 0x40000 if ARCH_ZYNQMP
+ default 0x20000 if ARCH_ZYNQ
+ help
+ Size of the sector containing the environment.
+
config ENV_UBI_PART
string "UBI partition name"
depends on ENV_IS_IN_UBI
endif
+config USE_DEFAULT_ENV_FILE
+ bool "Create default environment from file"
+ help
+ Normally, the default environment is automatically generated
+ based on the settings of various CONFIG_* options, as well
+ as the CONFIG_EXTRA_ENV_SETTINGS. By selecting this option,
+ you can instead define the entire default environment in an
+ external file.
+
+config DEFAULT_ENV_FILE
+ string "Path to default environment file"
+ depends on USE_DEFAULT_ENV_FILE
+ help
+ The path containing the default environment. The format is
+ the same as accepted by the mkenvimage tool: lines
+ containing key=value pairs, blank lines and lines beginning
+ with # are ignored.
+
+config ENV_VARS_UBOOT_RUNTIME_CONFIG
+ bool "Add run-time information to the environment"
+ help
+ Enable this in order to add variables describing certain
+ run-time determined information about the hardware to the
+ environment. These will be named board_name, board_rev.
+
+if SPL_ENV_SUPPORT
+config SPL_ENV_IS_NOWHERE
+ bool "SPL Environment is not stored"
+ default y if ENV_IS_NOWHERE
+ help
+ Similar to ENV_IS_NOWHERE, used for SPL environment.
+
+config SPL_ENV_IS_IN_MMC
+ bool "SPL Environment in an MMC device"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_MMC
+ default y
+ help
+ Similar to ENV_IS_IN_MMC, used for SPL environment.
+
+config SPL_ENV_IS_IN_FAT
+ bool "SPL Environment is in a FAT filesystem"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FAT
+ default y
+ help
+ Similar to ENV_IS_IN_FAT, used for SPL environment.
+
+config SPL_ENV_IS_IN_EXT4
+ bool "SPL Environment is in a EXT4 filesystem"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_EXT4
+ default y
+ help
+ Similar to ENV_IS_IN_EXT4, used for SPL environment.
+
+config SPL_ENV_IS_IN_NAND
+ bool "SPL Environment in a NAND device"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_NAND
+ default y
+ help
+ Similar to ENV_IS_IN_NAND, used for SPL environment.
+
+config SPL_ENV_IS_IN_SPI_FLASH
+ bool "SPL Environment is in SPI flash"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_SPI_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_SPI_FLASH, used for SPL environment.
+
+config SPL_ENV_IS_IN_FLASH
+ bool "SPL Environment in flash memory"
+ depends on !SPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_FLASH, used for SPL environment.
+
+endif
+
+if TPL_ENV_SUPPORT
+
+config TPL_ENV_IS_NOWHERE
+ bool "TPL Environment is not stored"
+ default y if ENV_IS_NOWHERE
+ help
+ Similar to ENV_IS_NOWHERE, used for TPL environment.
+
+config TPL_ENV_IS_IN_MMC
+ bool "TPL Environment in an MMC device"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_MMC
+ default y
+ help
+ Similar to ENV_IS_IN_MMC, used for TPL environment.
+
+config TPL_ENV_IS_IN_FAT
+ bool "TPL Environment is in a FAT filesystem"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FAT
+ default y
+ help
+ Similar to ENV_IS_IN_FAT, used for TPL environment.
+
+config TPL_ENV_IS_IN_EXT4
+ bool "TPL Environment is in a EXT4 filesystem"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_EXT4
+ default y
+ help
+ Similar to ENV_IS_IN_EXT4, used for TPL environment.
+
+config TPL_ENV_IS_IN_NAND
+ bool "TPL Environment in a NAND device"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_NAND
+ default y
+ help
+ Similar to ENV_IS_IN_NAND, used for TPL environment.
+
+config TPL_ENV_IS_IN_SPI_FLASH
+ bool "TPL Environment is in SPI flash"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_SPI_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_SPI_FLASH, used for TPL environment.
+
+config TPL_ENV_IS_IN_FLASH
+ bool "TPL Environment in flash memory"
+ depends on !TPL_ENV_IS_NOWHERE
+ depends on ENV_IS_IN_FLASH
+ default y
+ help
+ Similar to ENV_IS_IN_FLASH, used for TPL environment.
+
+endif
+
endmenu
projects / J-u-boot.git / blobdiff