prompt "Mainboard vendor"
default VENDOR_EMULATION
+config VENDOR_CONGATEC
+ bool "congatec"
+
config VENDOR_COREBOOT
bool "coreboot"
endchoice
# board-specific options below
+source "board/congatec/Kconfig"
source "board/coreboot/Kconfig"
source "board/efi/Kconfig"
source "board/emulation/Kconfig"
# platform-specific options below
source "arch/x86/cpu/baytrail/Kconfig"
+source "arch/x86/cpu/broadwell/Kconfig"
source "arch/x86/cpu/coreboot/Kconfig"
source "arch/x86/cpu/ivybridge/Kconfig"
source "arch/x86/cpu/qemu/Kconfig"
# architecture-specific options below
+config AHCI
+ default y
+
config SYS_MALLOC_F_LEN
default 0x800
help
Additional size of malloc() pool before relocation.
+config FSP_USE_UPD
+ bool
+ depends on HAVE_FSP
+ default y
+ help
+ Most FSPs use UPD data region for some FSP customization. But there
+ are still some FSPs that might not even have UPD. For such FSPs,
+ override this to n in their platform Kconfig files.
+
+config FSP_BROKEN_HOB
+ bool
+ depends on HAVE_FSP
+ help
+ Indicate some buggy FSPs that does not report memory used by FSP
+ itself as reserved in the resource descriptor HOB. Select this to
+ tell U-Boot to do some additional work to ensure U-Boot relocation
+ do not overwrite the important boot service data which is used by
+ FSP, otherwise the subsequent call to fsp_notify() will fail.
+
config ENABLE_MRC_CACHE
bool "Enable MRC cache"
depends on !EFI && !SYS_COREBOOT
to be used for speeding up boot time on future reboots and/or
power cycles.
+ For platforms that use Intel FSP for the memory initialization,
+ please check FSP output HOB via U-Boot command 'fsp hob' to see
+ if there is FSP_NON_VOLATILE_STORAGE_HOB_GUID (asm/fsp/fsp_hob.h).
+ If such GUID does not exist, MRC cache is not avaiable on such
+ platform (eg: Intel Queensbay), which means selecting this option
+ here does not make any difference.
+
+config HAVE_MRC
+ bool "Add a System Agent binary"
+ depends on !HAVE_FSP
+ help
+ Select this option to add a System Agent binary to
+ the resulting U-Boot image. MRC stands for Memory Reference Code.
+ It is a binary blob which U-Boot uses to set up SDRAM.
+
+ Note: Without this binary U-Boot will not be able to set up its
+ SDRAM so will not boot.
+
+config CACHE_MRC_BIN
+ bool
+ depends on HAVE_MRC
+ default n
+ help
+ Enable caching for the memory reference code binary. This uses an
+ MTRR (memory type range register) to turn on caching for the section
+ of SPI flash that contains the memory reference code. This makes
+ SDRAM init run faster.
+
+config CACHE_MRC_SIZE_KB
+ int
+ depends on HAVE_MRC
+ default 512
+ help
+ Sets the size of the cached area for the memory reference code.
+ This ends at the end of SPI flash (address 0xffffffff) and is
+ measured in KB. Typically this is set to 512, providing for 0.5MB
+ of cached space.
+
+config DCACHE_RAM_BASE
+ hex
+ depends on HAVE_MRC
+ help
+ Sets the base of the data cache area in memory space. This is the
+ start address of the cache-as-RAM (CAR) area and the address varies
+ depending on the CPU. Once CAR is set up, read/write memory becomes
+ available at this address and can be used temporarily until SDRAM
+ is working.
+
+config DCACHE_RAM_SIZE
+ hex
+ depends on HAVE_MRC
+ default 0x40000
+ help
+ Sets the total size of the data cache area in memory space. This
+ sets the size of the cache-as-RAM (CAR) area. Note that much of the
+ CAR space is required by the MRC. The CAR space available to U-Boot
+ is normally at the start and typically extends to 1/4 or 1/2 of the
+ available size.
+
+config DCACHE_RAM_MRC_VAR_SIZE
+ hex
+ depends on HAVE_MRC
+ help
+ This is the amount of CAR (Cache as RAM) reserved for use by the
+ memory reference code. This depends on the implementation of the
+ memory reference code and must be set correctly or the board will
+ not boot.
+
+config HAVE_REFCODE
+ bool "Add a Reference Code binary"
+ help
+ Select this option to add a Reference Code binary to the resulting
+ U-Boot image. This is an Intel binary blob that handles system
+ initialisation, in this case the PCH and System Agent.
+
+ Note: Without this binary (on platforms that need it such as
+ broadwell) U-Boot will be missing some critical setup steps.
+ Various peripherals may fail to work.
+
config SMP
bool "Enable Symmetric Multiprocessing"
default n
the memory used by this initialisation process. Typically 4KB is
enough space.
-config TSC_CALIBRATION_BYPASS
- bool "Bypass Time-Stamp Counter (TSC) calibration"
- default n
- help
- By default U-Boot automatically calibrates Time-Stamp Counter (TSC)
- running frequency via Model-Specific Register (MSR) and Programmable
- Interval Timer (PIT). If the calibration does not work on your board,
- select this option and provide a hardcoded TSC running frequency with
- CONFIG_TSC_FREQ_IN_MHZ below.
-
- Normally this option should be turned on in a simulation environment
- like qemu.
-
-config TSC_FREQ_IN_MHZ
- int "Time-Stamp Counter (TSC) running frequency in MHz"
- depends on TSC_CALIBRATION_BYPASS
- default 1000
- help
- The running frequency in MHz of Time-Stamp Counter (TSC).
-
config HAVE_VGA_BIOS
bool "Add a VGA BIOS image"
help
config GENERATE_ACPI_TABLE
bool "Generate an ACPI (Advanced Configuration and Power Interface) table"
default n
+ select QFW if QEMU
help
The Advanced Configuration and Power Interface (ACPI) specification
provides an open standard for device configuration and management
Check http://www.dmtf.org/standards/smbios for details.
+config SMBIOS_MANUFACTURER
+ string "SMBIOS Manufacturer"
+ depends on GENERATE_SMBIOS_TABLE
+ default SYS_VENDOR
+ help
+ The board manufacturer to store in SMBIOS structures.
+ Change this to override the default one (CONFIG_SYS_VENDOR).
+
+config SMBIOS_PRODUCT_NAME
+ string "SMBIOS Product Name"
+ depends on GENERATE_SMBIOS_TABLE
+ default SYS_BOARD
+ help
+ The product name to store in SMBIOS structures.
+ Change this to override the default one (CONFIG_SYS_BOARD).
+
endmenu
config MAX_PIRQ_LINKS
so a default 0x10000000 size covers all of the 256 buses which is the
maximum number of PCI buses as defined by the PCI specification.
+config I8259_PIC
+ bool
+ default y
+ help
+ Intel 8259 ISA compatible chipset incorporates two 8259 (master and
+ slave) interrupt controllers. Include this to have U-Boot set up
+ the interrupt correctly.
+
+config I8254_TIMER
+ bool
+ default y
+ help
+ Intel 8254 timer contains three counters which have fixed uses.
+ Include this to have U-Boot set up the timer correctly.
+
+config I8042_KEYB
+ default y
+
+config DM_KEYBOARD
+ default y
+
+config SEABIOS
+ bool "Support booting SeaBIOS"
+ help
+ SeaBIOS is an open source implementation of a 16-bit X86 BIOS.
+ It can run in an emulator or natively on X86 hardware with the use
+ of coreboot/U-Boot. By turning on this option, U-Boot prepares
+ all the configuration tables that are necessary to boot SeaBIOS.
+
+ Check http://www.seabios.org/SeaBIOS for details.
+
+config HIGH_TABLE_SIZE
+ hex "Size of configuration tables which reside in high memory"
+ default 0x10000
+ depends on SEABIOS
+ help
+ SeaBIOS itself resides in E seg and F seg, where U-Boot puts all
+ configuration tables like PIRQ/MP/ACPI. To avoid conflicts, U-Boot
+ puts a copy of configuration tables in high memory region which
+ is reserved on the stack before relocation. The region size is
+ determined by this option.
+
+ Increse it if the default size does not fit the board's needs.
+ This is most likely due to a large ACPI DSDT table is used.
+
source "arch/x86/lib/efi/Kconfig"
endmenu