]> Git Repo - J-u-boot.git/blobdiff - configs/sama5d27_wlsom1_ek_mmc_defconfig
Convert CONFIG_SPL_BSS_START_ADDR to Kconfig
[J-u-boot.git] / configs / sama5d27_wlsom1_ek_mmc_defconfig
index 43be6fbeb3215d1686e2cf4efbb7b4b5a38bfe16..df88f6b78d30817f9ce5135a7e3320bfe8b49d24 100644 (file)
@@ -2,7 +2,6 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x26f00000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_SAMA5D27_WLSOM1_EK=y
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -20,9 +19,11 @@ CONFIG_DEBUG_UART_BASE=0xf801c000
 CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0
 CONFIG_FIT=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
@@ -33,10 +34,18 @@ CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
+CONFIG_SPL_MAX_SIZE=0x10000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x20000000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x218000
 CONFIG_SPL_DISPLAY_PRINT=y
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
 CONFIG_SPL_AT91_MCK_BYPASS=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_DM=y
 # CONFIG_CMD_FLASH is not set
@@ -94,9 +103,13 @@ CONFIG_ATMEL_USART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_ATMEL_QSPI=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_AT91=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_SPL_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
This page took 0.029438 seconds and 4 git commands to generate.