configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / a3y17lte_defconfig

diff --git a/configs/a3y17lte_defconfig b/configs/a3y17lte_defconfig
index 8636f151d825ee4155e3e719fcdd3fb6ff318a44..1143af9064b501a96431ebd762e08d2ef180954a 100644 (file)
--- a/configs/a3y17lte_defconfig
+++ b/configs/a3y17lte_defconfig
@@ -1,22 +1,25 @@
 CONFIG_ARM=y
-CONFIG_SYS_CONFIG_NAME="exynos78x0-common"
 CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=26000000
 CONFIG_ARCH_EXYNOS=y
-CONFIG_SYS_TEXT_BASE=0x40001000
+CONFIG_TEXT_BASE=0x40001000
 CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_ARCH_EXYNOS7=y
 CONFIG_TARGET_A3Y17LTE=y
 CONFIG_NR_DRAM_BANKS=8
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200e50
 CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte"
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_SYS_LOAD_ADDR=0x40001000
 CONFIG_FIT=y
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;"
 CONFIG_SAVE_PREV_BL_FDT_ADDR=y
 CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y
+CONFIG_SYS_PBSIZE=1024
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_DM_I2C_GPIO=y
-CONFIG_LMB_MAX_REGIONS=64