mpc83xx: Kconfig: Migrate HRCW to Kconfig

[J-u-boot.git] / include / fsl_usb.h

diff --git a/include/fsl_usb.h b/include/fsl_usb.h
index 915774cba8af69a907f26ed32804b5a9223491a2..c0f076b06daf5959e06c3535d29f5df4bbf33b6e 100644 (file)
--- a/include/fsl_usb.h
+++ b/include/fsl_usb.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Freescale USB Controller
  *
  * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _ASM_FSL_USB_H_
@@ -48,17 +47,54 @@ struct ccsr_usb_phy {
 #define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0)
 #define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1)
 #define CONFIG_SYS_FSL_USB_PLLPRG2_FRAC_LPF_EN (1 << 13)
+#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+#define CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV_INTERNAL_CLK (5 << 4)
+#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI_INTERNAL_CLK (6 << 16)
+#define CONFIG_SYS_FSL_USB_INTERNAL_SOC_CLK_EN (1 << 20)
+#endif
 #define CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV (1 << 4)
 #define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16)
 #define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21)
 #define CONFIG_SYS_FSL_USB_SYS_CLK_VALID (1 << 0)
+#define CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN (1 << 7)
+#define CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK (3 << 4)
+
+#define INC_DCNT_THRESHOLD_25MV        (0 << 4)
+#define INC_DCNT_THRESHOLD_50MV        (1 << 4)
+#define DEC_DCNT_THRESHOLD_25MV        (2 << 4)
+#define DEC_DCNT_THRESHOLD_50MV        (3 << 4)
 #else
 struct ccsr_usb_phy {
-       u8      res0[0x18];
+       u32     config1;
+       u32     config2;
+       u32     config3;
+       u32     config4;
+       u32     config5;
+       u32     status1;
        u32     usb_enable_override;
        u8      res[0xe4];
 };
-#define        CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE      1
+#define CONFIG_SYS_FSL_USB_HS_DISCNCT_INC (3 << 22)
+#define CONFIG_SYS_FSL_USB_RX_AUTO_CAL_RD_WR_SEL (1 << 20)
+#define CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_0 13
+#define CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_3 16
+#define CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_0 0
+#define CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_3 3
+#define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1
+#define CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK 0x07
 #endif
 
+/* USB Erratum Checking code */
+#if defined(CONFIG_PPC) || defined(CONFIG_ARM)
+bool has_dual_phy(void);
+bool has_erratum_a005275(void);
+bool has_erratum_a006261(void);
+bool has_erratum_a007075(void);
+bool has_erratum_a007798(void);
+bool has_erratum_a007792(void);
+bool has_erratum_a005697(void);
+bool has_erratum_a004477(void);
+bool has_erratum_a008751(void);
+bool has_erratum_a010151(void);
+#endif
 #endif /*_ASM_FSL_USB_H_ */