configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / x3_t30_defconfig

diff --git a/configs/x3_t30_defconfig b/configs/x3_t30_defconfig
index 094a7d0709183082e8b4b7c6c2e880df6ca661f5..c8da5b4ce3536137f6cdb77c0b4c14dd870fe060 100644 (file)
--- a/configs/x3_t30_defconfig
+++ b/configs/x3_t30_defconfig
@@ -1,5 +1,4 @@
 CONFIG_ARM=y
-CONFIG_SYS_L2CACHE_OFF=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_SUPPORT_PASSING_ATAGS=y
 CONFIG_CMDLINE_TAG=y
@@ -9,19 +8,20 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_SIZE=0x3000
 CONFIG_ENV_OFFSET=0xFFFFD000
 CONFIG_DEFAULT_DEVICE_TREE="tegra30-lg-p880"
-CONFIG_SPL_TEXT_BASE=0x80108000
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SPL_TEXT_BASE=0x80108000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_TEGRA30=y
 CONFIG_TARGET_X3_T30=y
 CONFIG_TEGRA_ENABLE_UARTD=y
 CONFIG_CMD_EBTUPDATE=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_BUTTON_CMD=y
 CONFIG_BOOTDELAY=0
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_KEYED_CTRLC=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc1; run bootcmd_mmc0; poweroff;"
+CONFIG_BOOTCOMMAND="bootflow scan; poweroff"
 CONFIG_SYS_PBSIZE=2084
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
@@ -31,7 +31,6 @@ CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x10000
 CONFIG_SYS_PROMPT="Tegra30 (x3) # "
-CONFIG_SYS_MAXARGS=64
 # CONFIG_CMD_BOOTEFI_BOOTMGR is not set
 CONFIG_CMD_BOOTMENU=y
 # CONFIG_CMD_IMI is not set