configs: visionfive2: Enable MULTI_DTB_FIT for JH7110 based board DT

[J-u-boot.git] / configs / lubancat-2-rk3568_defconfig

diff --git a/configs/lubancat-2-rk3568_defconfig b/configs/lubancat-2-rk3568_defconfig
index 80ae6ec3a2e9478b57b547fb1a197a4a4051245a..46cc3c03fffb486f2779b0809816f69d49f64703 100644 (file)
--- a/configs/lubancat-2-rk3568_defconfig
+++ b/configs/lubancat-2-rk3568_defconfig
@@ -2,22 +2,14 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
-CONFIG_DEFAULT_DEVICE_TREE="rk3568-lubancat-2"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-lubancat-2"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
+CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
+CONFIG_EFI_VAR_BUF_SIZE=16384
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_FIT_SIGNATURE=y
@@ -28,12 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-lubancat-2.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
@@ -85,4 +72,3 @@ CONFIG_USB_OHCI_GENERIC=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
 CONFIG_ERRNO_STR=y
-CONFIG_EFI_VAR_BUF_SIZE=16384