microblaze: Enable netconsole

[J-u-boot.git] / include / configs / lwmon5.h

diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 4c9744ca4fa16fdacbbe32a6a0eb6ad3c0c6a538..2ebcd1615f083962dbb0df14f36acf98d22f3e45 100644 (file)
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -43,6 +43,8 @@
 
 #define CONFIG_SYS_CLK_FREQ    33300000        /* external freq to pll */
 
+#define CONFIG_4xx_DCACHE              /* enable cache in SDRAM        */
+
 #define CONFIG_BOARD_EARLY_INIT_F      /* Call board_early_init_f      */
 #define CONFIG_BOARD_EARLY_INIT_R      /* Call board_early_init_r      */
 #define CONFIG_BOARD_POSTCLK_INIT      /* Call board_postclk_init      */
@@ -119,7 +121,6 @@
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK             /* no external clock provided   */
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SERIAL_MULTI
 
 #define CONFIG_SYS_BAUDRATE_TABLE                                              \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -321,6 +322,8 @@
 /* Update size in "reg" property of NOR FLASH device tree nodes */
 #define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
 
+#define CONFIG_FIT                     /* enable FIT image support     */
+
 #define        CONFIG_POST_KEY_MAGIC   "3C+3E" /* press F3 + F5 keys to force POST */
 
 #define        CONFIG_PREBOOT          "setenv bootdelay 15"
@@ -375,7 +378,6 @@
 #define CONFIG_HAS_ETH0
 #define CONFIG_SYS_RX_ETH_BUFFER       32      /* Number of ethernet rx buffers & descriptors */
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_HAS_ETH1                1       /* add support for "eth1addr"   */
 #define CONFIG_PHY1_ADDR       1
 
@@ -393,16 +395,17 @@
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
 
-/* USB */
-#ifdef CONFIG_440EPX
-#define CONFIG_USB_OHCI
+/*
+ * USB/EHCI
+ */
+#define CONFIG_USB_EHCI                        /* Enable EHCI USB support      */
+#define CONFIG_USB_EHCI_PPC4XX         /* on PPC4xx platform           */
+#define CONFIG_SYS_PPC4XX_USB_ADDR     0xe0000300
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
 #define CONFIG_USB_STORAGE
 
-/* Comment this out to enable USB 1.1 device */
-#define USB_2_0_DEVICE
-
-#endif /* CONFIG_440EPX */
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -430,11 +433,9 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_LOG
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SDRAM
@@ -456,9 +457,6 @@
 #define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
 
 #define CONFIG_SYS_HUSH_PARSER         1       /* Use the HUSH parser          */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
-#endif
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size      */
@@ -482,22 +480,6 @@
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_VERSION_VARIABLE 1      /* include version env variable */
 
-/*
- * PCI stuff
- */
-/* General PCI */
-#define CONFIG_PCI                     /* include pci support          */
-#undef CONFIG_PCI_PNP                  /* do (not) pci plug-and-play   */
-#define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup  */
-#define CONFIG_SYS_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/
-
-/* Board-specific PCI */
-#define CONFIG_SYS_PCI_TARGET_INIT
-#define CONFIG_SYS_PCI_MASTER_INIT
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8  /* AMCC                         */
-#define CONFIG_SYS_PCI_SUBSYS_ID       0xcafe  /* Whatever                     */
-
 #ifndef DEBUG
 #define CONFIG_HW_WATCHDOG     1       /* Use external HW-Watchdog     */
 #endif