mpc83xx: Kconfig: Migrate HRCW to Kconfig

[J-u-boot.git] / include / axp221.h

diff --git a/include/axp221.h b/include/axp221.h
index 9c871623a87fbdbe5d2251dbce36311753bf4a46..caffb910f4b0bb61f169f11b88869f0bee6fd225 100644 (file)
--- a/include/axp221.h
+++ b/include/axp221.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2013 Oliver Schinagl <[email protected]>
  *
  * X-Powers AXP221 Power Management IC driver
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /* Page 0 addresses */
@@ -43,10 +42,8 @@
 #define AXP221_ALDO1_CTRL      0x28
 #define AXP221_ALDO2_CTRL      0x29
 #define AXP221_ALDO3_CTRL      0x2a
-#define AXP221_VBUS_IPSOUT     0x30
-#define AXP221_VBUS_IPSOUT_DRIVEBUS    (1 << 2)
-#define AXP221_MISC_CTRL       0x8f
-#define AXP221_MISC_CTRL_N_VBUSEN_FUNC (1 << 4)
+#define AXP221_SHUTDOWN                0x32
+#define AXP221_SHUTDOWN_POWEROFF       (1 << 7)
 #define AXP221_PAGE            0xff
 
 /* Page 1 addresses */
@@ -55,6 +52,10 @@
 /* For axp_gpio.c */
 #define AXP_POWER_STATUS               0x00
 #define AXP_POWER_STATUS_VBUS_PRESENT          (1 << 5)
+#define AXP_VBUS_IPSOUT                        0x30
+#define AXP_VBUS_IPSOUT_DRIVEBUS               (1 << 2)
+#define AXP_MISC_CTRL                  0x8f
+#define AXP_MISC_CTRL_N_VBUSEN_FUNC            (1 << 4)
 #define AXP_GPIO0_CTRL                 0x90
 #define AXP_GPIO1_CTRL                 0x92
 #define AXP_GPIO_CTRL_OUTPUT_LOW               0x00 /* Drive pin low */
@@ -62,19 +63,3 @@
 #define AXP_GPIO_CTRL_INPUT                    0x02 /* Input */
 #define AXP_GPIO_STATE                 0x94
 #define AXP_GPIO_STATE_OFFSET                  0
-
-int axp221_set_dcdc1(unsigned int mvolt);
-int axp221_set_dcdc2(unsigned int mvolt);
-int axp221_set_dcdc3(unsigned int mvolt);
-int axp221_set_dcdc4(unsigned int mvolt);
-int axp221_set_dcdc5(unsigned int mvolt);
-int axp221_set_dldo1(unsigned int mvolt);
-int axp221_set_dldo2(unsigned int mvolt);
-int axp221_set_dldo3(unsigned int mvolt);
-int axp221_set_dldo4(unsigned int mvolt);
-int axp221_set_aldo1(unsigned int mvolt);
-int axp221_set_aldo2(unsigned int mvolt);
-int axp221_set_aldo3(unsigned int mvolt);
-int axp221_set_eldo(int eldo_num, unsigned int mvolt);
-int axp221_init(void);
-int axp221_get_sid(unsigned int *sid);