]> Git Repo - J-u-boot.git/blobdiff - configs/sama5d3_xplained_nandflash_defconfig
ARM: dts: stm32: Drop access-controllers from SPL DT on DH STM32MP15xx DHSOM
[J-u-boot.git] / configs / sama5d3_xplained_nandflash_defconfig
index a1b6122f8eb42b4cfde1466e010a2432f858113b..6a66637a9dc0197965a79cbf1a68bceb08d2849d 100644 (file)
@@ -12,18 +12,21 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
-CONFIG_SPL_TEXT_BASE=0x300000
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_MONITOR_LEN=1048576
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK=0x318000
+CONFIG_SPL_TEXT_BASE=0x300000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x20000000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
@@ -33,11 +36,10 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="nand read 0x21000000 0x180000 0x80000;nand read 0x22000000 0x200000 0x600000;bootz 0x22000000 - 0x21000000"
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL_MAX_SIZE=0x18000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x20000000
-CONFIG_SPL_BSS_MAX_SIZE=0x80000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
@@ -45,17 +47,14 @@ CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_HUSH_PARSER=y
-CONFIG_SYS_CBSIZE=256
-CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y
+CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_HASH=y
@@ -86,7 +85,6 @@ CONFIG_PMECC_CAP=4
 CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
 CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SYS_NAND_PAGE_COUNT=0x40
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
 CONFIG_SYS_NAND_OOBSIZE=0x40
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
This page took 0.029786 seconds and 4 git commands to generate.