Merge patch series "spi-nor: Add parallel and stacked memories support"

[J-u-boot.git] / configs / sama5d4_xplained_spiflash_defconfig

diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig
index 66280f236a321627b9f1a55a9cd17fb51a3d3027..28babe7a4af62ce2e8ce9e495164c82a0239f5d3 100644 (file)
--- a/configs/sama5d4_xplained_spiflash_defconfig
+++ b/configs/sama5d4_xplained_spiflash_defconfig
@@ -2,12 +2,15 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
-CONFIG_SYS_TEXT_BASE=0x26f00000
+CONFIG_TEXT_BASE=0x26f00000
 CONFIG_TARGET_SAMA5D4_XPLAINED=y
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0
+CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x6000
 CONFIG_ENV_SECT_SIZE=0x1000
@@ -15,15 +18,21 @@ CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained"
 CONFIG_SPL_TEXT_BASE=0x200000
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x218000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x20000000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SPL=y
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfc00c000
 CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
@@ -33,15 +42,19 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x21000000 0x60000 0xc000; sf read 0x22000000 0x6c000 0x394000; bootz 0x22000000 - 0x21000000"
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_SPL_MAX_SIZE=0x18000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
 CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
@@ -57,7 +70,6 @@ CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_CLK=y
@@ -79,9 +91,7 @@ CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
 CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
-CONFIG_DM_ETH=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
@@ -103,7 +113,7 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_DM_VIDEO=y
+CONFIG_VIDEO=y
 # CONFIG_VIDEO_BPP8 is not set
 # CONFIG_VIDEO_BPP32 is not set
 CONFIG_ATMEL_HLCD=y
@@ -111,4 +121,3 @@ CONFIG_W1=y
 CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y
 CONFIG_W1_EEPROM_DS24XXX=y
-CONFIG_OF_LIBFDT_OVERLAY=y