+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015 Technexion Ltd.
*
* Configuration settings for the Technexion PICO-IMX6UL-EMMC board.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __PICO_IMX6UL_CONFIG_H
#define __PICO_IMX6UL_CONFIG_H
#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>
#include "mx6_common.h"
-#include <asm/imx-common/gpio.h>
+#include <asm/mach-imx/gpio.h>
+#include "imx6_spl.h"
/* Network support */
#define CONFIG_FEC_MXC
-#define CONFIG_MII
#define IMX_FEC_BASE ENET2_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR 0x1
#define CONFIG_FEC_XCV_TYPE RMII
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M) /* Increase due to DFU */
#define CONFIG_MXC_UART_BASE UART6_BASE_ADDR
/* MMC Configs */
-#define CONFIG_FSL_USDHC
-#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_USBD_HS
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
-
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
#define DFU_DEFAULT_POLL_TIMEOUT 300
+#define CONFIG_DFU_ENV_SETTINGS \
+ "dfu_alt_info=" \
+ "spl raw 0x2 0x400 mmcpart 1;" \
+ "u-boot raw 0x8a 0x400 mmcpart 1;" \
+ "/boot/zImage ext4 0 1;" \
+ "/boot/imx6ul-pico-hobbit.dtb ext4 0 1;" \
+ "rootfs part 0 1\0" \
+
+#define BOOTMENU_ENV \
+ "bootmenu_0=Boot using PICO-Hobbit baseboard=" \
+ "setenv fdtfile imx6ul-pico-hobbit.dtb\0" \
+
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
"image=zImage\0" \
"console=ttymxc5\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ BOOTMENU_ENV \
"fdt_addr=0x83000000\0" \
- "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
- "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
- "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "fdt_addr_r=0x83000000\0" \
+ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+ "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+ "ramdisk_addr_r=0x83000000\0" \
+ "ramdiskaddr=0x83000000\0" \
+ "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
"mmcautodetect=yes\0" \
- "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "run netargs; " \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "${get_cmd} ${image}; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
-
-#define CONFIG_BOOTCOMMAND \
- "if mmc rescan; then " \
- "if run loadimage; then " \
- "run mmcboot; " \
- "else run netboot; " \
- "fi; " \
- "else run netboot; fi"
+ CONFIG_DFU_ENV_SETTINGS \
+ "findfdt=" \
+ "if test $fdtfile = ask ; then " \
+ "bootmenu -1; fi;" \
+ "if test $fdtfile != ask ; then " \
+ "saveenv; fi;\0" \
+ "finduuid=part uuid mmc 0:1 uuid\0" \
+ "partitions=" \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \
+ "fastboot_partition_alias_system=rootfs\0" \
+ "setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \
+ BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + SZ_128M
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
-#define CONFIG_CMDLINE_EDITING
-
/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
/* environment organization */
#define CONFIG_ENV_SIZE SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (8 * SZ_64K)
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 0
-#define CONFIG_MMCROOT "/dev/mmcblk0p2"
#endif /* __PICO_IMX6UL_CONFIG_H */
projects / J-u-boot.git / blobdiff