configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / x530_defconfig

diff --git a/configs/x530_defconfig b/configs/x530_defconfig
index 3cd8ef5f9f331689bad79d0d8d3788a0fa2e987d..815370c90ecc95b43ae39e9fdd8cfa3caad63cd2 100644 (file)
--- a/configs/x530_defconfig
+++ b/configs/x530_defconfig
@@ -13,16 +13,17 @@ CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DEFAULT_DEVICE_TREE="armada-385-atl-x530"
-CONFIG_SPL_TEXT_BASE=0x40000030
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0x4002c000
+CONFIG_SPL_TEXT_BASE=0x40000030
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x40023000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_ENV_ADDR=0x100000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
@@ -47,8 +48,8 @@ CONFIG_CMD_PCI=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
 CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
@@ -64,6 +65,7 @@ CONFIG_CMD_UBI=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ARP_TIMEOUT=200
 CONFIG_NET_RETRY_COUNT=50
+CONFIG_IPV6=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
@@ -74,7 +76,6 @@ CONFIG_MTD_RAW_NAND=y
 CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_NAND_PXA3XX=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_SST=y
@@ -95,3 +96,4 @@ CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_WDT=y
 CONFIG_WDT_ORION=y
 CONFIG_SPL_TINY_MEMSET=y
+# CONFIG_TOOLS_MKEFICAPSULE is not set