board/km: drop CONFIG_KM_ROOTFSSIZE

[J-u-boot.git] / include / configs / at91sam9261ek.h

diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index a6d37515a16aaabcfb2d5db5b5d8f3ad2bdcd45e..12726c10bd6d5725eb1ba76e7fb13381f094d65e 100644 (file)
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2007-2008
  * Stelian Pop <[email protected]>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * Configuation settings for the AT91SAM9261EK board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -15,56 +14,23 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768           /* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK     18432000        /* 18.432 MHz crystal */
 
-#ifdef CONFIG_AT91SAM9G10
-#define CONFIG_AT91SAM9G10EK           /* It's an Atmel AT91SAM9G10 EK*/
-#else
-#define CONFIG_AT91SAM9261EK           /* It's an Atmel AT91SAM9261 EK*/
-#endif
-
 #include <asm/hardware.h>
 
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#define CONFIG_ATMEL_LEGACY
-#define CONFIG_SYS_TEXT_BASE           0x21f00000
-
 /*
  * Hardware drivers
  */
 
 /* LCD */
 #define LCD_BPP                                LCD_COLOR8
-#define CONFIG_LCD_LOGO
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_LCD
-#ifdef CONFIG_AT91SAM9261EK
-#define CONFIG_ATMEL_LCD_BGR555
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          0x20000000
 #define CONFIG_SYS_SDRAM_SIZE          0x04000000
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       (16 * 1024)
+#define CONFIG_SYS_INIT_RAM_ADDR       ATMEL_BASE_SRAM
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE             1
 #define CONFIG_SYS_NAND_BASE                   0x40000000
 #define CONFIG_SYS_NAND_DBW_8
@@ -78,73 +44,13 @@
 #endif
 
 /* Ethernet */
-#define CONFIG_DRIVER_DM9000
 #define CONFIG_DM9000_BASE             0x30000000
 #define DM9000_IO                      CONFIG_DM9000_BASE
 #define DM9000_DATA                    (CONFIG_DM9000_BASE + 4)
 #define CONFIG_DM9000_USE_16BIT
 #define CONFIG_DM9000_NO_SROM
-#define CONFIG_NET_RETRY_COUNT         20
-#define CONFIG_RESET_PHY_R
 
 /* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00500000      /* AT91SAM9261_UHP_BASE */
-#ifdef CONFIG_AT91SAM9G10EK
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9g10"
-#else
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9261"
-#endif
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-
-#define CONFIG_SYS_LOAD_ADDR                   0x22000000      /* load address */
-
-#define CONFIG_SYS_MEMTEST_START               CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END                 0x23e00000
-
-#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_OFFSET      0x4200
-#define CONFIG_ENV_SIZE                0x4200
-#define CONFIG_ENV_SECT_SIZE   0x210
-#define CONFIG_ENV_SPI_MAX_HZ  15000000
-#define CONFIG_BOOTCOMMAND     "sf probe 0; " \
-                               "sf read 0x22000000 0x84000 0x294000; " \
-                               "bootm 0x22000000"
-
-#elif CONFIG_SYS_USE_DATAFLASH_CS3
-
-/* bootstrap + u-boot + env + linux in dataflash on CS3 */
-#define CONFIG_ENV_OFFSET      0x4200
-#define CONFIG_ENV_SIZE                0x4200
-#define CONFIG_ENV_SECT_SIZE   0x210
-#define CONFIG_ENV_SPI_MAX_HZ  15000000
-#define CONFIG_BOOTCOMMAND     "sf probe 0:3; " \
-                               "sf read 0x22000000 0x84000 0x294000; " \
-                               "bootm 0x22000000"
-
-#else /* CONFIG_SYS_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET              0x120000
-#define CONFIG_ENV_OFFSET_REDUND       0x100000
-#define CONFIG_ENV_SIZE                0x20000         /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0x200000 0x300000; bootm"
-#endif
-
-#define CONFIG_SYS_CBSIZE              256
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN          ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 
 #endif