rockchip: Separate the reset cause from display cpuinfo

[J-u-boot.git] / configs / pfla02_defconfig

diff --git a/configs/pfla02_defconfig b/configs/pfla02_defconfig
index 0a03854e70e1315de68264f962e3605a95f2a342..36aec53f39edefa518b72eb7e5caec69bbe164b3 100644 (file)
--- a/configs/pfla02_defconfig
+++ b/configs/pfla02_defconfig
@@ -4,10 +4,17 @@ CONFIG_SYS_TEXT_BASE=0x17800000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_ENV_SIZE=0x4000
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
 CONFIG_TARGET_PFLA02=y
+CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
+CONFIG_ENV_OFFSET_REDUND=0x110000
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
@@ -18,9 +25,10 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_BOUNCE_BUFFER=y
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_DMA_SUPPORT=y
-CONFIG_SPL_EXT_SUPPORT=y
+CONFIG_SPL_DMA=y
+CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
@@ -29,26 +37,35 @@ CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
-# CONFIG_CMD_NAND is not set
+CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:-(nand);spi2.0:1024k(bootloader),64k(env1),64k(env2),-(rescue)"
 CONFIG_CMD_UBI=y
 # CONFIG_SPL_PARTITION_UUIDS is not set
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
+CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
-CONFIG_NAND=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_MXS=y
 CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_BUS=2
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_NETDEVICES=y
 CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_MXC_UART=y
 CONFIG_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_DM_THERMAL=y