arm: bcmbca: add bcm63146 SoC support

[J-u-boot.git] / configs / igep00x0_defconfig

diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
index 2e1811228e5995910a4e7200c2aa967d6c1b8a40..25eda11dd45efc63ed37203499b11260e4c836de 100644 (file)
--- a/configs/igep00x0_defconfig
+++ b/configs/igep00x0_defconfig
@@ -9,6 +9,8 @@ CONFIG_SPL_TEXT_BASE=0x40200000
 CONFIG_TARGET_OMAP3_IGEP00X0=y
 CONFIG_SPL=y
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTDELAY=3
 CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
@@ -17,6 +19,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL_MAX_SIZE=0xec00
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_SYS_SPL_MALLOC_SIZE=0x800000
 # CONFIG_SPL_FS_EXT4 is not set
 CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_NAND_DRIVERS=y
@@ -37,13 +41,18 @@ CONFIG_SPL_UBI_LOAD_KERNEL_ID=3
 CONFIG_SPL_UBI_LOAD_ARGS_ID=4
 CONFIG_SPL_ONENAND_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
+CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
+CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500
+CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200
 CONFIG_SYS_MAXARGS=64
 CONFIG_CMD_SPL=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_NAND=y
 CONFIG_CMD_ONENAND=y
+CONFIG_USE_ONENAND_BOARD_INIT=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_MTDPARTS=y
@@ -58,7 +67,7 @@ CONFIG_ENV_UBI_VOLUME="config"
 CONFIG_ENV_UBI_VOLUME_REDUND="config_r"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_VERSION_VARIABLE=y
-CONFIG_NET_RANDOM_ETHADDR=y
+# CONFIG_NET is not set
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_MMC_OMAP_HS=y
@@ -72,9 +81,6 @@ CONFIG_SYS_NAND_PAGE_SIZE=0x800
 CONFIG_SYS_NAND_OOBSIZE=0x40
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_MTD_UBI_FASTMAP=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x2C000000
-CONFIG_SMC911X_32_BIT=y
 CONFIG_CONS_INDEX=3
 CONFIG_SPI=y
 CONFIG_DM_SPI=y