configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / kontron_sl28_defconfig

diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig
index fcc6dd394d91a433995aa58f6f060bf4d0a61512..1f684093252e4ef1d88329abacdd8472dc7f4210 100644 (file)
--- a/configs/kontron_sl28_defconfig
+++ b/configs/kontron_sl28_defconfig
@@ -6,15 +6,25 @@ CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800eff0
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x3e0000
 CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-kontron-sl28"
-CONFIG_SPL_TEXT_BASE=0x18010000
+CONFIG_DEFAULT_DEVICE_TREE="freescale/fsl-ls1028a-kontron-sl28"
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_MONITOR_LEN=1048576
+CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK=0x18009ff0
+CONFIG_SPL_TEXT_BASE=0x18010000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x80100000
+CONFIG_SPL_BSS_MAX_SIZE=0x100000
+CONFIG_SYS_BOOTM_LEN=0x800000
+CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_SPL_SIZE_LIMIT=0x20000
-CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3f0000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -22,31 +32,38 @@ CONFIG_SPL_SPI=y
 # CONFIG_PSCI_RESET is not set
 CONFIG_ARMV8_PSCI=y
 CONFIG_ARMV8_PSCI_RELOCATE=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_FSL_NUM_CC_PLLS=3
 CONFIG_MP=y
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT=y
-# CONFIG_USE_SPL_FIT_GENERATOR is not set
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTDELAY=10
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 CONFIG_BOARD_LATE_INIT=y
+# CONFIG_HWCONFIG is not set
 CONFIG_PCI_INIT_R=y
 CONFIG_SPL_MAX_SIZE=0x20000
 CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_SYS_MALLOC_SIZE=0x200000
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x900
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x230000
-CONFIG_SYS_CBSIZE=256
-CONFIG_SYS_PBSIZE=276
+CONFIG_CMDLINE_PS_SUPPORT=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CMD_DFU=y
-CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
@@ -60,7 +77,8 @@ CONFIG_CMD_EFIDEBUG=y
 CONFIG_CMD_RNG=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_LIST="fsl-ls1028a-kontron-sl28 fsl-ls1028a-kontron-sl28-var1 fsl-ls1028a-kontron-sl28-var2 fsl-ls1028a-kontron-sl28-var3 fsl-ls1028a-kontron-sl28-var4"
+CONFIG_OF_UPSTREAM=y
+CONFIG_OF_LIST="freescale/fsl-ls1028a-kontron-sl28 freescale/fsl-ls1028a-kontron-sl28-var1 freescale/fsl-ls1028a-kontron-sl28-var2 freescale/fsl-ls1028a-kontron-sl28-var3 freescale/fsl-ls1028a-kontron-sl28-var4"
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
@@ -96,7 +114,6 @@ CONFIG_NVME_PCI=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_RTC_RV8803=y
-CONFIG_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_FSL_DSPI=y
@@ -115,8 +132,3 @@ CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_WDT=y
 CONFIG_WDT_SL28CPLD=y
 CONFIG_WDT_SP805=y
-CONFIG_OF_LIBFDT_ASSUME_MASK=0x0
-CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_EFI_SET_TIME=y
-CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
-CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y