configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / mt7620_mt7530_rfb_defconfig

diff --git a/configs/mt7620_mt7530_rfb_defconfig b/configs/mt7620_mt7530_rfb_defconfig
index 341d86838c2ff81e41056a77b5816ffaf1b4eee3..06f37f007c21495e75e55bd56a098315e8497989 100644 (file)
--- a/configs/mt7620_mt7530_rfb_defconfig
+++ b/configs/mt7620_mt7530_rfb_defconfig
@@ -1,23 +1,34 @@
 CONFIG_MIPS=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x30000
 CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="mediatek,mt7620-mt7530-rfb"
+CONFIG_SPL_SERIAL=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
+CONFIG_SPL_BSS_START_ADDR=0x80010000
+CONFIG_SPL_BSS_MAX_SIZE=0x10000
+CONFIG_SYS_BOOTM_LEN=0x1000000
+CONFIG_SYS_LOAD_ADDR=0x80010000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xb0000c00
 CONFIG_DEBUG_UART_CLOCK=40000000
 CONFIG_ARCH_MTMIPS=y
 CONFIG_BOARD_MT7620_MT7530_RFB=y
-CONFIG_DEFAULT_DEVICE_TREE="mediatek,mt7620-mt7530-rfb"
+CONFIG_SYS_MIPS_TIMER_FREQ=290000000
+CONFIG_MIPS_CACHE_SETUP=y
+CONFIG_MIPS_CACHE_DISABLE=y
 CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
 CONFIG_MIPS_BOOT_FDT=y
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_SYS_MALLOC_BOOTPARAMS=y
+CONFIG_SPL_MAX_SIZE=0x10000
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_NOR_SUPPORT=y
 # CONFIG_CMD_ELF is not set
@@ -27,10 +38,8 @@ CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_SPI=y
-# CONFIG_CMD_NFS is not set
 CONFIG_CMD_MII=y
 # CONFIG_CMD_MDIO is not set
-# CONFIG_PARTITIONS is not set
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupts resets reset-names"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y