board: asus: tf600t: enable TEGRA20_SLINK only for TF600T

[J-u-boot.git] / configs / apalis_t30_defconfig

diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig
index 516552584c76f6de94908952b4b3eb70fd8e517e..03a1f2c2390697ca2367102c35ccdbca1301b981 100644 (file)
--- a/configs/apalis_t30_defconfig
+++ b/configs/apalis_t30_defconfig
@@ -8,7 +8,6 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xFFFFDE00
 CONFIG_DEFAULT_DEVICE_TREE="tegra30-apalis"
 CONFIG_SPL_TEXT_BASE=0x80108000
-CONFIG_SYS_PROMPT="Apalis T30 # "
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SPL_STACK=0x800ffffc
 CONFIG_TEGRA30=y
@@ -16,6 +15,8 @@ CONFIG_TARGET_APALIS_T30=y
 CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_PCI=y
 CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_SYS_CBSIZE=1024
+CONFIG_SYS_PBSIZE=1054
 CONFIG_CONSOLE_MUX=y
 CONFIG_SYS_STDIO_DEREGISTER=y
 # CONFIG_DISPLAY_BOARDINFO is not set
@@ -24,13 +25,12 @@ CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
-CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000
-CONFIG_SYS_SPL_MALLOC_SIZE=0x10000
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x10000
+CONFIG_SYS_PROMPT="Apalis T30 # "
 CONFIG_SYS_MAXARGS=32
-CONFIG_SYS_CBSIZE=1024
-CONFIG_SYS_PBSIZE=1054
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
@@ -38,7 +38,6 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_CMD_NFS is not set
 CONFIG_CMD_EXT4_WRITE=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
@@ -46,10 +45,10 @@ CONFIG_OF_LIVE=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SYS_MMC_ENV_PART=1
+CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_BLOCKSIZE=16352
 CONFIG_TFTP_TSIZE=y
-CONFIG_SPL_DM=y
 CONFIG_SYS_I2C_TEGRA=y
 CONFIG_E1000=y
 CONFIG_E1000_NO_NVM=y