Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-sh into next

[J-u-boot.git] / configs / lx2160aqds_tfa_SECURE_BOOT_defconfig

diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
index 4e387f33f5bb782f41d456cf97a471d6c585fbb3..321ed71993b827b226e418d359c37f14e4383fe5 100644 (file)
--- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
@@ -11,6 +11,7 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-qds"
 CONFIG_FSPI_AHB_EN_4BYTE=y
+CONFIG_SYS_MONITOR_LEN=958464
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_PCI=y
@@ -25,19 +26,18 @@ CONFIG_VOL_MONITOR_LTC3882_SET=y
 CONFIG_SYS_FSL_NUM_CC_PLLS=4
 CONFIG_FSL_QIXIS=y
 CONFIG_REMAKE_ELF=y
-CONFIG_SYS_MONITOR_LEN=958464
 CONFIG_MP=y
+CONFIG_DYNAMIC_SYS_CLK_FREQ=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
+CONFIG_SYS_PBSIZE=532
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_MISC_INIT_R=y
 CONFIG_RESET_PHY_R=y
-CONFIG_SYS_MAXARGS=64
-CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
@@ -96,7 +96,6 @@ CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_PCIE_LAYERSCAPE_GEN4=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_PCF2127=y
-CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_PL01X_SERIAL=y
 CONFIG_SPI=y
@@ -109,4 +108,3 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_MAX_CONTROLLER_COUNT=2
 CONFIG_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y