Merge branch 'master' of git://git.denx.de/u-boot-imx

[J-u-boot.git] / include / configs / bf561-ezkit.h

diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 4779a97a4557c6bdab5b2cb54f75c587ffba5b85..7b020e67fec91b5a38d6b796745e4b9975a36499 100644 (file)
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -11,7 +11,6 @@
 /*
  * Processor Settings
  */
-#define CONFIG_BFIN_CPU             bf561-0.3
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
 
@@ -60,7 +59,8 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK       1
-#define CONFIG_DRIVER_SMC91111 1
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC91111        1
 #define CONFIG_SMC91111_BASE   0x2C010300
 #define CONFIG_SMC_USE_32_BIT  1
 #define CONFIG_HOSTNAME                bf561-ezkit
@@ -86,7 +86,7 @@
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 #define ENV_IS_EMBEDDED
 #else
-#define ENV_IS_EMBEDDED_CUSTOM
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #endif
 #ifdef ENV_IS_EMBEDDED
 /* WARNING - the following is hand-optimized to fit within
@@ -95,15 +95,10 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-       cpu/blackfin/traps.o            (.text .text.*); \
-       cpu/blackfin/interrupt.o        (.text .text.*); \
-       cpu/blackfin/serial.o           (.text .text.*); \
-       common/dlmalloc.o               (.text .text.*); \
-       lib_generic/crc32.o             (.text .text.*); \
-       lib_generic/zlib.o              (.text .text.*); \
-       board/bf561-ezkit/bf561-ezkit.o (.text .text.*); \
+       arch/blackfin/lib/libblackfin.o (.text*); \
+       arch/blackfin/cpu/libblackfin.o (.text*); \
        . = DEFINED(env_offset) ? env_offset : .; \
-       common/env_embedded.o           (.text .text.*);
+       common/env_embedded.o (.text*);
 #endif
 
 
@@ -111,48 +106,8 @@
  * I2C Settings
  */
 #define CONFIG_SOFT_I2C
-#ifdef CONFIG_SOFT_I2C
-#define PF_SCL PF0
-#define PF_SDA PF1
-#define I2C_INIT \
-       do { \
-               *pFIO0_DIR |= PF_SCL; \
-               SSYNC(); \
-       } while (0)
-#define I2C_ACTIVE \
-       do { \
-               *pFIO0_DIR |= PF_SDA; \
-               *pFIO0_INEN &= ~PF_SDA; \
-               SSYNC(); \
-       } while (0)
-#define I2C_TRISTATE \
-       do { \
-               *pFIO0_DIR &= ~PF_SDA; \
-               *pFIO0_INEN |= PF_SDA; \
-               SSYNC(); \
-       } while (0)
-#define I2C_READ ((*pFIO0_FLAG_D & PF_SDA) != 0)
-#define I2C_SDA(bit) \
-       do { \
-               if (bit) \
-                       *pFIO0_FLAG_S = PF_SDA; \
-               else \
-                       *pFIO0_FLAG_C = PF_SDA; \
-               SSYNC(); \
-       } while (0)
-#define I2C_SCL(bit) \
-       do { \
-               if (bit) \
-                       *pFIO0_FLAG_S = PF_SCL; \
-               else \
-                       *pFIO0_FLAG_C = PF_SCL; \
-               SSYNC(); \
-       } while (0)
-#define I2C_DELAY              udelay(5)       /* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_SPEED           50000
-#define CONFIG_SYS_I2C_SLAVE           0
-#endif
+#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
+#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
 
 
 /*