]> Git Repo - J-u-boot.git/blobdiff - configs/octeon_nic23_defconfig
configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0
[J-u-boot.git] / configs / octeon_nic23_defconfig
index 23cdef3316c04cc94044e17e5f344bcfbf42520c..76adbf201e3d59c4ad58f8ab8a491a67dd1fe6fb 100644 (file)
@@ -1,33 +1,35 @@
 CONFIG_MIPS=y
-CONFIG_SYS_TEXT_BASE=0xffffffff80000000
+CONFIG_TEXT_BASE=0xffffffff80000000
 CONFIG_SYS_MALLOC_LEN=0x1000000
 CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xe000
 CONFIG_ENV_SECT_SIZE=0x100
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_SYS_LOAD_ADDR=0xffffffff80100000
 CONFIG_DEBUG_UART_BASE=0x8001180000000800
 CONFIG_DEBUG_UART_CLOCK=800000000
-CONFIG_SYS_LOAD_ADDR=0xffffffff80100000
 CONFIG_ENV_ADDR=0xe000
 CONFIG_ARCH_OCTEON=y
 CONFIG_TARGET_OCTEON_NIC23=y
 # CONFIG_MIPS_CACHE_SETUP is not set
 # CONFIG_MIPS_CACHE_DISABLE is not set
 CONFIG_MIPS_RELOCATION_TABLE_SIZE=0xc000
+CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
 CONFIG_OF_BOARD_FIXUP=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
 # CONFIG_SYS_DEVICE_NULLDEV is not set
+CONFIG_CYCLIC=y
 CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_LAST_STAGE_INIT=y
 CONFIG_HUSH_PARSER=y
-CONFIG_SYS_CBSIZE=256
-CONFIG_SYS_PBSIZE=276
-# CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -44,7 +46,7 @@ CONFIG_EFI_PARTITION=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_TFTP_TSIZE=y
 CONFIG_SATA=y
-CONFIG_AHCI_MVEBU=y
+CONFIG_AHCI_GENERIC=y
 CONFIG_LBA48=y
 CONFIG_SYS_64BIT_LBA=y
 CONFIG_CLK=y
@@ -52,7 +54,6 @@ CONFIG_CLK=y
 CONFIG_MISC=y
 CONFIG_MMC=y
 CONFIG_MMC_OCTEONTX=y
-CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
@@ -63,13 +64,11 @@ CONFIG_PHYLIB_10G=y
 CONFIG_DM_MDIO=y
 CONFIG_DM_ETH_PHY=y
 CONFIG_NET_OCTEON=y
-CONFIG_PCI=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_RAM=y
 CONFIG_RAM_OCTEON=y
 CONFIG_RAM_OCTEON_DDR4=y
-CONFIG_SCSI=y
 CONFIG_DEBUG_UART_SHIFT=3
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_SYS_NS16550=y
This page took 0.024302 seconds and 4 git commands to generate.