#include <linux/compiler.h>
#include <part.h>
-#define SD_VERSION_SD 0x20000
-#define SD_VERSION_3 (SD_VERSION_SD | 0x300)
-#define SD_VERSION_2 (SD_VERSION_SD | 0x200)
-#define SD_VERSION_1_0 (SD_VERSION_SD | 0x100)
-#define SD_VERSION_1_10 (SD_VERSION_SD | 0x10a)
-#define MMC_VERSION_MMC 0x10000
-#define MMC_VERSION_UNKNOWN (MMC_VERSION_MMC)
-#define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x102)
-#define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x104)
-#define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x202)
-#define MMC_VERSION_3 (MMC_VERSION_MMC | 0x300)
-#define MMC_VERSION_4 (MMC_VERSION_MMC | 0x400)
-#define MMC_VERSION_4_1 (MMC_VERSION_MMC | 0x401)
-#define MMC_VERSION_4_2 (MMC_VERSION_MMC | 0x402)
-#define MMC_VERSION_4_3 (MMC_VERSION_MMC | 0x403)
-#define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429)
-#define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405)
-
-#define MMC_MODE_HS 0x001
-#define MMC_MODE_HS_52MHz 0x010
-#define MMC_MODE_4BIT 0x100
-#define MMC_MODE_8BIT 0x200
-#define MMC_MODE_SPI 0x400
-#define MMC_MODE_HC 0x800
-
-#define MMC_MODE_MASK_WIDTH_BITS (MMC_MODE_4BIT | MMC_MODE_8BIT)
-#define MMC_MODE_WIDTH_BITS_SHIFT 8
+/* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */
+#define SD_VERSION_SD (1U << 31)
+#define MMC_VERSION_MMC (1U << 30)
+
+#define MAKE_SDMMC_VERSION(a, b, c) \
+ ((((u32)(a)) << 16) | ((u32)(b) << 8) | (u32)(c))
+#define MAKE_SD_VERSION(a, b, c) \
+ (SD_VERSION_SD | MAKE_SDMMC_VERSION(a, b, c))
+#define MAKE_MMC_VERSION(a, b, c) \
+ (MMC_VERSION_MMC | MAKE_SDMMC_VERSION(a, b, c))
+
+#define EXTRACT_SDMMC_MAJOR_VERSION(x) \
+ (((u32)(x) >> 16) & 0xff)
+#define EXTRACT_SDMMC_MINOR_VERSION(x) \
+ (((u32)(x) >> 8) & 0xff)
+#define EXTRACT_SDMMC_CHANGE_VERSION(x) \
+ ((u32)(x) & 0xff)
+
+#define SD_VERSION_3 MAKE_SD_VERSION(3, 0, 0)
+#define SD_VERSION_2 MAKE_SD_VERSION(2, 0, 0)
+#define SD_VERSION_1_0 MAKE_SD_VERSION(1, 0, 0)
+#define SD_VERSION_1_10 MAKE_SD_VERSION(1, 10, 0)
+
+#define MMC_VERSION_UNKNOWN MAKE_MMC_VERSION(0, 0, 0)
+#define MMC_VERSION_1_2 MAKE_MMC_VERSION(1, 2, 0)
+#define MMC_VERSION_1_4 MAKE_MMC_VERSION(1, 4, 0)
+#define MMC_VERSION_2_2 MAKE_MMC_VERSION(2, 2, 0)
+#define MMC_VERSION_3 MAKE_MMC_VERSION(3, 0, 0)
+#define MMC_VERSION_4 MAKE_MMC_VERSION(4, 0, 0)
+#define MMC_VERSION_4_1 MAKE_MMC_VERSION(4, 1, 0)
+#define MMC_VERSION_4_2 MAKE_MMC_VERSION(4, 2, 0)
+#define MMC_VERSION_4_3 MAKE_MMC_VERSION(4, 3, 0)
+#define MMC_VERSION_4_41 MAKE_MMC_VERSION(4, 4, 1)
+#define MMC_VERSION_4_5 MAKE_MMC_VERSION(4, 5, 0)
+#define MMC_VERSION_5_0 MAKE_MMC_VERSION(5, 0, 0)
+
+#define MMC_MODE_HS (1 << 0)
+#define MMC_MODE_HS_52MHz (1 << 1)
+#define MMC_MODE_4BIT (1 << 2)
+#define MMC_MODE_8BIT (1 << 3)
+#define MMC_MODE_SPI (1 << 4)
+#define MMC_MODE_DDR_52MHz (1 << 5)
#define SD_DATA_4BIT 0x00040000
-#define IS_SD(x) (x->version & SD_VERSION_SD)
+#define IS_SD(x) ((x)->version & SD_VERSION_SD)
+#define IS_MMC(x) ((x)->version & MMC_VERSION_MMC)
#define MMC_DATA_READ 1
#define MMC_DATA_WRITE 2
#define UNUSABLE_ERR -17 /* Unusable Card */
#define COMM_ERR -18 /* Communications Error */
#define TIMEOUT -19
-#define IN_PROGRESS -20 /* operation is in progress */
-#define SWITCH_ERR -21 /* Card reports failure to switch mode */
+#define SWITCH_ERR -20 /* Card reports failure to switch mode */
#define MMC_CMD_GO_IDLE_STATE 0
#define MMC_CMD_SEND_OP_COND 1
#define SD_CMD_SEND_RELATIVE_ADDR 3
#define SD_CMD_SWITCH_FUNC 6
#define SD_CMD_SEND_IF_COND 8
+#define SD_CMD_SWITCH_UHS18V 11
#define SD_CMD_APP_SET_BUS_WIDTH 6
#define SD_CMD_ERASE_WR_BLK_START 32
#define SD_HIGHSPEED_BUSY 0x00020000
#define SD_HIGHSPEED_SUPPORTED 0x00020000
-#define MMC_HS_TIMING 0x00000100
-#define MMC_HS_52MHZ 0x2
-
#define OCR_BUSY 0x80000000
#define OCR_HCS 0x40000000
#define OCR_VOLTAGE_MASK 0x007FFF80
/*
* EXT_CSD fields
*/
+#define EXT_CSD_ENH_START_ADDR 136 /* R/W */
+#define EXT_CSD_ENH_SIZE_MULT 140 /* R/W */
#define EXT_CSD_GP_SIZE_MULT 143 /* R/W */
+#define EXT_CSD_PARTITION_SETTING 155 /* R/W */
#define EXT_CSD_PARTITIONS_ATTRIBUTE 156 /* R/W */
+#define EXT_CSD_MAX_ENH_SIZE_MULT 157 /* R */
#define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */
#define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
+#define EXT_CSD_WR_REL_PARAM 166 /* R */
+#define EXT_CSD_WR_REL_SET 167 /* R/W */
#define EXT_CSD_RPMB_MULT 168 /* RO */
#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
#define EXT_CSD_BOOT_BUS_WIDTH 177
#define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */
#define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_DDR_1_8V (1 << 2)
+#define EXT_CSD_CARD_TYPE_DDR_1_2V (1 << 3)
+#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
+ | EXT_CSD_CARD_TYPE_DDR_1_2V)
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
+#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */
+#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */
#define EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
#define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
#define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2)
#define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x)
+#define EXT_CSD_PARTITION_SETTING_COMPLETED (1 << 0)
+
+#define EXT_CSD_ENH_USR (1 << 0) /* user data area is enhanced */
+#define EXT_CSD_ENH_GP(x) (1 << ((x)+1)) /* GP part (x+1) is enhanced */
+
+#define EXT_CSD_HS_CTRL_REL (1 << 0) /* host controlled WR_REL_SET */
+
+#define EXT_CSD_WR_DATA_REL_USR (1 << 0) /* user data area WR_REL */
+#define EXT_CSD_WR_DATA_REL_GP(x) (1 << ((x)+1)) /* GP part (x+1) WR_REL */
+
#define R1_ILLEGAL_COMMAND (1 << 22)
#define R1_APP_CMD (1 << 5)
#define MMCPART_NOAVAILABLE (0xff)
#define PART_ACCESS_MASK (0x7)
#define PART_SUPPORT (0x1)
+#define ENHNCD_SUPPORT (0x2)
#define PART_ENH_ATTRIB (0x1f)
/* Maximum block size for MMC */
uint csd[4];
uint cid[4];
ushort rca;
+ u8 part_support;
+ u8 part_attr;
+ u8 wr_rel_set;
char part_config;
char part_num;
uint tran_speed;
uint read_bl_len;
uint write_bl_len;
- uint erase_grp_size;
+ uint erase_grp_size; /* in 512-byte sectors */
+ uint hc_wp_grp_size; /* in 512-byte sectors */
u64 capacity;
u64 capacity_user;
u64 capacity_boot;
u64 capacity_rpmb;
u64 capacity_gp[4];
+ u64 enh_user_start;
+ u64 enh_user_size;
block_dev_desc_t block_dev;
char op_cond_pending; /* 1 if we are waiting on an op_cond command */
char init_in_progress; /* 1 if we have done mmc_start_init() */
char preinit; /* start init as early as possible */
- uint op_cond_response; /* the response byte from the last op_cond */
+ int ddr_mode;
+};
+
+struct mmc_hwpart_conf {
+ struct {
+ uint enh_start; /* in 512-byte sectors */
+ uint enh_size; /* in 512-byte sectors, if 0 no enh area */
+ unsigned wr_rel_change : 1;
+ unsigned wr_rel_set : 1;
+ } user;
+ struct {
+ uint size; /* in 512-byte sectors */
+ unsigned enhanced : 1;
+ unsigned wr_rel_change : 1;
+ unsigned wr_rel_set : 1;
+ } gp_part[4];
+};
+
+enum mmc_hwpart_conf_mode {
+ MMC_HWPART_CONF_CHECK,
+ MMC_HWPART_CONF_SET,
+ MMC_HWPART_CONF_COMPLETE,
};
int mmc_register(struct mmc *mmc);
int mmc_set_dev(int dev_num);
void print_mmc_devices(char separator);
int get_mmc_num(void);
-int board_mmc_getcd(struct mmc *mmc);
int mmc_switch_part(int dev_num, unsigned int part_num);
+int mmc_hwpart_config(struct mmc *mmc, const struct mmc_hwpart_conf *conf,
+ enum mmc_hwpart_conf_mode mode);
int mmc_getcd(struct mmc *mmc);
+int board_mmc_getcd(struct mmc *mmc);
int mmc_getwp(struct mmc *mmc);
+int board_mmc_getwp(struct mmc *mmc);
int mmc_set_dsr(struct mmc *mmc, u16 val);
/* Function to change the size of boot partition and rpmb partitions */
int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
int mmc_legacy_init(int verbose);
#endif
+void board_mmc_power_init(void);
int board_mmc_init(bd_t *bis);
+int cpu_mmc_init(bd_t *bis);
+int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr);
+
+struct pci_device_id;
+
+/**
+ * pci_mmc_init() - set up PCI MMC devices
+ *
+ * This finds all the matching PCI IDs and sets them up as MMC devices.
+ *
+ * @name: Name to use for devices
+ * @mmc_supported: PCI IDs to search for
+ * @num_ids: Number of elements in @mmc_supported
+ */
+int pci_mmc_init(const char *name, struct pci_device_id *mmc_supported,
+ int num_ids);
/* Set block count limit because of 16 bit register limit on some hardware*/
#ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT
projects / J-u-boot.git / blobdiff