configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / sama5d2_icp_qspiflash_defconfig

diff --git a/configs/sama5d2_icp_qspiflash_defconfig b/configs/sama5d2_icp_qspiflash_defconfig
index 27bd05f960129cae15ddd9420134e36ff30d896a..463951a9d026aa234270ec76303c9ae55ebdaaaa 100644 (file)
--- a/configs/sama5d2_icp_qspiflash_defconfig
+++ b/configs/sama5d2_icp_qspiflash_defconfig
@@ -1,23 +1,28 @@
 CONFIG_ARM=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
-CONFIG_SYS_TEXT_BASE=0x26f00000
+CONFIG_TEXT_BASE=0x26f00000
 CONFIG_TARGET_SAMA5D2_ICP=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0
+CONFIG_SF_DEFAULT_SPEED=66000000
 CONFIG_ENV_SIZE=0x4000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_icp"
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_DEBUG_UART_BASE=0xf801c000
 CONFIG_DEBUG_UART_CLOCK=83000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x20000000
 CONFIG_SYS_MEMTEST_END=0x40000000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_SYS_BOOT_GET_CMDLINE=y
 CONFIG_SYS_BOOT_GET_KBD=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0
+# CONFIG_EFI_LOADER_HII is not set
 CONFIG_FIT=y
 CONFIG_QSPI_BOOT=y
 CONFIG_SD_BOOT=y
@@ -26,11 +31,11 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlycon earlyprintk=serial,ttyS0, ignore_loglevel root=/dev/mmcblk0p2 memtest=0 rootfstype=ext4 rw rootwait"
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x21000000 at91-sama5d2_icp.dtb; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000"
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
 CONFIG_HUSH_PARSER=y
-CONFIG_SYS_CBSIZE=256
-CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_CONFIG=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
@@ -39,7 +44,6 @@ CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_CLK=y
-CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 # CONFIG_CMD_LOADS is not set
@@ -47,8 +51,8 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_SDRAM=y
 CONFIG_CMD_SF_TEST=y
 CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y
+CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_GETTIME=y
 CONFIG_CMD_TIMER=y
@@ -57,7 +61,6 @@ CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_UTMI=y
@@ -72,15 +75,12 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
-CONFIG_SF_DEFAULT_SPEED=66000000
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_SST=y
-CONFIG_DM_ETH=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91PIO4=y
@@ -99,5 +99,3 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_OF_LIBFDT_OVERLAY=y
-# CONFIG_EFI_LOADER_HII is not set