dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO

[J-u-boot.git] / cmd / i2c.c

diff --git a/cmd/i2c.c b/cmd/i2c.c
index cc01119b2107381d05577a1233c4d3f24e087d33..5d0e207874f53fc19ea01f36d52451ff138f601e 100644 (file)
--- a/cmd/i2c.c
+++ b/cmd/i2c.c
@@ -124,13 +124,13 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
  * For legacy code, this is not stored, so we need to use a suitable
  * default.
  */
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
 #define DEFAULT_ADDR_LEN       (-1)
 #else
 #define DEFAULT_ADDR_LEN       1
 #endif
 
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
 static struct udevice *i2c_cur_bus;
 
 static int cmd_i2c_set_bus_num(unsigned int busnum)
@@ -209,7 +209,7 @@ void i2c_init_board(void)
  *
  * Returns I2C bus speed in Hz.
  */
-#if !defined(CONFIG_SYS_I2C) && !defined(CONFIG_DM_I2C)
+#if !defined(CONFIG_SYS_I2C) && !CONFIG_IS_ENABLED(DM_I2C)
 /*
  * TODO: Implement architecture-specific get/set functions
  * Should go away, if we switched completely to new multibus support
@@ -298,7 +298,7 @@ static int do_i2c_read(struct cmd_tbl *cmdtp, int flag, int argc,
        int alen;
        u_char  *memaddr;
        int ret;
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        struct udevice *dev;
 #endif
 
@@ -329,7 +329,7 @@ static int do_i2c_read(struct cmd_tbl *cmdtp, int flag, int argc,
         */
        memaddr = (u_char *)simple_strtoul(argv[4], NULL, 16);
 
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        ret = i2c_get_cur_bus_chip(chip, &dev);
        if (!ret && alen != -1)
                ret = i2c_set_chip_offset_len(dev, alen);
@@ -352,7 +352,7 @@ static int do_i2c_write(struct cmd_tbl *cmdtp, int flag, int argc,
        int alen;
        u_char  *memaddr;
        int ret;
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        struct udevice *dev;
        struct dm_i2c_chip *i2c_chip;
 #endif
@@ -384,13 +384,13 @@ static int do_i2c_write(struct cmd_tbl *cmdtp, int flag, int argc,
         */
        length = simple_strtoul(argv[4], NULL, 16);
 
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        ret = i2c_get_cur_bus_chip(chip, &dev);
        if (!ret && alen != -1)
                ret = i2c_set_chip_offset_len(dev, alen);
        if (ret)
                return i2c_report_err(ret, I2C_ERR_WRITE);
-       i2c_chip = dev_get_parent_platdata(dev);
+       i2c_chip = dev_get_parent_plat(dev);
        if (!i2c_chip)
                return i2c_report_err(ret, I2C_ERR_WRITE);
 #endif
@@ -402,7 +402,7 @@ static int do_i2c_write(struct cmd_tbl *cmdtp, int flag, int argc,
                 * a page boundary. No write delay upon completion, take this
                 * into account if linking commands.
                 */
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                i2c_chip->flags &= ~DM_I2C_CHIP_WR_ADDRESS;
                ret = dm_i2c_write(dev, devaddr, memaddr, length);
 #else
@@ -416,7 +416,7 @@ static int do_i2c_write(struct cmd_tbl *cmdtp, int flag, int argc,
                 * write transactions of one byte each
                 */
                while (length-- > 0) {
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                        i2c_chip->flags |= DM_I2C_CHIP_WR_ADDRESS;
                        ret = dm_i2c_write(dev, devaddr++, memaddr++, 1);
 #else
@@ -435,7 +435,7 @@ static int do_i2c_write(struct cmd_tbl *cmdtp, int flag, int argc,
        return 0;
 }
 
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
 static int do_i2c_flags(struct cmd_tbl *cmdtp, int flag, int argc,
                        char *const argv[])
 {
@@ -520,7 +520,7 @@ static int do_i2c_md(struct cmd_tbl *cmdtp, int flag, int argc,
        int alen;
        int     j, nbytes, linebytes;
        int ret;
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        struct udevice *dev;
 #endif
 
@@ -562,7 +562,7 @@ static int do_i2c_md(struct cmd_tbl *cmdtp, int flag, int argc,
                        length = simple_strtoul(argv[3], NULL, 16);
        }
 
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        ret = i2c_get_cur_bus_chip(chip, &dev);
        if (!ret && alen != -1)
                ret = i2c_set_chip_offset_len(dev, alen);
@@ -583,7 +583,7 @@ static int do_i2c_md(struct cmd_tbl *cmdtp, int flag, int argc,
 
                linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
 
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                ret = dm_i2c_read(dev, addr, linebuf, linebytes);
 #else
                ret = i2c_read(chip, addr, alen, linebuf, linebytes);
@@ -641,7 +641,7 @@ static int do_i2c_mw(struct cmd_tbl *cmdtp, int flag, int argc,
        uchar   byte;
        int     count;
        int ret;
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        struct udevice *dev;
 #endif
 
@@ -661,7 +661,7 @@ static int do_i2c_mw(struct cmd_tbl *cmdtp, int flag, int argc,
        if (alen > 3)
                return CMD_RET_USAGE;
 
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        ret = i2c_get_cur_bus_chip(chip, &dev);
        if (!ret && alen != -1)
                ret = i2c_set_chip_offset_len(dev, alen);
@@ -682,7 +682,7 @@ static int do_i2c_mw(struct cmd_tbl *cmdtp, int flag, int argc,
                count = 1;
 
        while (count-- > 0) {
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                ret = dm_i2c_write(dev, addr++, &byte, 1);
 #else
                ret = i2c_write(chip, addr++, alen, &byte, 1);
@@ -730,7 +730,7 @@ static int do_i2c_crc(struct cmd_tbl *cmdtp, int flag, int argc,
        ulong   crc;
        ulong   err;
        int ret = 0;
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        struct udevice *dev;
 #endif
 
@@ -750,7 +750,7 @@ static int do_i2c_crc(struct cmd_tbl *cmdtp, int flag, int argc,
        if (alen > 3)
                return CMD_RET_USAGE;
 
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        ret = i2c_get_cur_bus_chip(chip, &dev);
        if (!ret && alen != -1)
                ret = i2c_set_chip_offset_len(dev, alen);
@@ -770,7 +770,7 @@ static int do_i2c_crc(struct cmd_tbl *cmdtp, int flag, int argc,
        crc = 0;
        err = 0;
        while (count-- > 0) {
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                ret = dm_i2c_read(dev, addr, &byte, 1);
 #else
                ret = i2c_read(chip, addr, alen, &byte, 1);
@@ -814,7 +814,7 @@ static int mod_i2c_mem(struct cmd_tbl *cmdtp, int incrflag, int flag, int argc,
        int     size = 1;
        int     nbytes;
        int ret;
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        struct udevice *dev;
 #endif
 
@@ -851,7 +851,7 @@ static int mod_i2c_mem(struct cmd_tbl *cmdtp, int incrflag, int flag, int argc,
                        return CMD_RET_USAGE;
        }
 
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        ret = i2c_get_cur_bus_chip(chip, &dev);
        if (!ret && alen != -1)
                ret = i2c_set_chip_offset_len(dev, alen);
@@ -865,7 +865,7 @@ static int mod_i2c_mem(struct cmd_tbl *cmdtp, int incrflag, int flag, int argc,
         */
        do {
                printf("%08lx:", addr);
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                ret = dm_i2c_read(dev, addr, (uchar *)&data, size);
 #else
                ret = i2c_read(chip, addr, alen, (uchar *)&data, size);
@@ -912,7 +912,7 @@ static int mod_i2c_mem(struct cmd_tbl *cmdtp, int incrflag, int flag, int argc,
                                 * good enough to not time out
                                 */
                                bootretry_reset_cmd_timeout();
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                                ret = dm_i2c_write(dev, addr, (uchar *)&data,
                                                   size);
 #else
@@ -964,7 +964,7 @@ static int do_i2c_probe(struct cmd_tbl *cmdtp, int flag, int argc,
        unsigned int bus = GET_BUS_NUM;
 #endif /* NOPROBES */
        int ret;
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        struct udevice *bus, *dev;
 
        if (i2c_get_cur_bus(&bus))
@@ -990,7 +990,7 @@ static int do_i2c_probe(struct cmd_tbl *cmdtp, int flag, int argc,
                if (skip)
                        continue;
 #endif
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                ret = dm_i2c_probe(bus, j, 0, &dev);
 #else
                ret = i2c_probe(j);
@@ -1039,7 +1039,7 @@ static int do_i2c_loop(struct cmd_tbl *cmdtp, int flag, int argc,
        u_char  bytes[16];
        int     delay;
        int ret;
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        struct udevice *dev;
 #endif
 
@@ -1058,7 +1058,7 @@ static int do_i2c_loop(struct cmd_tbl *cmdtp, int flag, int argc,
        alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
        if (alen > 3)
                return CMD_RET_USAGE;
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        ret = i2c_get_cur_bus_chip(chip, &dev);
        if (!ret && alen != -1)
                ret = i2c_set_chip_offset_len(dev, alen);
@@ -1084,7 +1084,7 @@ static int do_i2c_loop(struct cmd_tbl *cmdtp, int flag, int argc,
         * Run the loop...
         */
        while (1) {
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                ret = dm_i2c_read(dev, addr, bytes, length);
 #else
                ret = i2c_read(chip, addr, alen, bytes, length);
@@ -1165,7 +1165,7 @@ static int do_sdram(struct cmd_tbl *cmdtp, int flag, int argc,
        u_char  data[128];
        u_char  cksum;
        int     j, ret;
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        struct udevice *dev;
 #endif
 
@@ -1221,7 +1221,7 @@ static int do_sdram(struct cmd_tbl *cmdtp, int flag, int argc,
         */
        chip = simple_strtoul (argv[1], NULL, 16);
 
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        ret = i2c_get_cur_bus_chip(chip, &dev);
        if (!ret)
                ret = dm_i2c_read(dev, 0, data, sizeof(data));
@@ -1664,7 +1664,7 @@ int do_edid(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
        uint chip;
        struct edid1_info edid;
        int ret;
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        struct udevice *dev;
 #endif
 
@@ -1674,7 +1674,7 @@ int do_edid(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
        }
 
        chip = simple_strtoul(argv[1], NULL, 16);
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        ret = i2c_get_cur_bus_chip(chip, &dev);
        if (!ret)
                ret = dm_i2c_read(dev, 0, (uchar *)&edid, sizeof(edid));
@@ -1695,19 +1695,19 @@ int do_edid(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 }
 #endif /* CONFIG_I2C_EDID */
 
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
 static void show_bus(struct udevice *bus)
 {
        struct udevice *dev;
 
-       printf("Bus %d:\t%s", bus->req_seq, bus->name);
+       printf("Bus %d:\t%s", dev_seq(bus), bus->name);
        if (device_active(bus))
-               printf("  (active %d)", bus->seq);
+               printf("  (active %d)", dev_seq(bus));
        printf("\n");
        for (device_find_first_child(bus, &dev);
             dev;
             device_find_next_child(&dev)) {
-               struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
+               struct dm_i2c_chip *chip = dev_get_parent_plat(dev);
 
                printf("   %02x: %s, offset len %x, flags %x\n",
                       chip->chip_addr, dev->name, chip->offset_len,
@@ -1725,13 +1725,13 @@ static void show_bus(struct udevice *bus)
  *
  * Returns zero always.
  */
-#if defined(CONFIG_SYS_I2C) || defined(CONFIG_DM_I2C)
+#if defined(CONFIG_SYS_I2C) || CONFIG_IS_ENABLED(DM_I2C)
 static int do_i2c_show_bus(struct cmd_tbl *cmdtp, int flag, int argc,
                           char *const argv[])
 {
        if (argc == 1) {
                /* show all busses */
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                struct udevice *bus;
                struct uclass *uc;
                int ret;
@@ -1766,7 +1766,7 @@ static int do_i2c_show_bus(struct cmd_tbl *cmdtp, int flag, int argc,
 
                /* show specific bus */
                i = simple_strtoul(argv[1], NULL, 10);
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                struct udevice *bus;
                int ret;
 
@@ -1812,7 +1812,7 @@ static int do_i2c_show_bus(struct cmd_tbl *cmdtp, int flag, int argc,
  * on error.
  */
 #if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS) || \
-               defined(CONFIG_DM_I2C)
+               CONFIG_IS_ENABLED(DM_I2C)
 static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc,
                          char *const argv[])
 {
@@ -1821,11 +1821,11 @@ static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc,
 
        if (argc == 1) {
                /* querying current setting */
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                struct udevice *bus;
 
                if (!i2c_get_cur_bus(&bus))
-                       bus_no = bus->seq;
+                       bus_no = dev_seq(bus);
                else
                        bus_no = -1;
 #else
@@ -1841,7 +1841,7 @@ static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc,
                }
 #endif
                printf("Setting bus to %d\n", bus_no);
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                ret = cmd_i2c_set_bus_num(bus_no);
 #else
                ret = i2c_set_bus_num(bus_no);
@@ -1869,14 +1869,14 @@ static int do_i2c_bus_speed(struct cmd_tbl *cmdtp, int flag, int argc,
 {
        int speed, ret=0;
 
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        struct udevice *bus;
 
        if (i2c_get_cur_bus(&bus))
                return 1;
 #endif
        if (argc == 1) {
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                speed = dm_i2c_get_bus_speed(bus);
 #else
                speed = i2c_get_bus_speed();
@@ -1886,7 +1886,7 @@ static int do_i2c_bus_speed(struct cmd_tbl *cmdtp, int flag, int argc,
        } else {
                speed = simple_strtoul(argv[1], NULL, 10);
                printf("Setting bus speed to %d Hz\n", speed);
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
                ret = dm_i2c_set_bus_speed(bus, speed);
 #else
                ret = i2c_set_bus_speed(speed);
@@ -1942,7 +1942,7 @@ static int do_i2c_nm(struct cmd_tbl *cmdtp, int flag, int argc,
 static int do_i2c_reset(struct cmd_tbl *cmdtp, int flag, int argc,
                        char *const argv[])
 {
-#if defined(CONFIG_DM_I2C)
+#if CONFIG_IS_ENABLED(DM_I2C)
        struct udevice *bus;
 
        if (i2c_get_cur_bus(&bus))
@@ -1960,12 +1960,12 @@ static int do_i2c_reset(struct cmd_tbl *cmdtp, int flag, int argc,
 }
 
 static struct cmd_tbl cmd_i2c_sub[] = {
-#if defined(CONFIG_SYS_I2C) || defined(CONFIG_DM_I2C)
+#if defined(CONFIG_SYS_I2C) || CONFIG_IS_ENABLED(DM_I2C)
        U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""),
 #endif
        U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
 #if defined(CONFIG_SYS_I2C) || \
-       defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C)
+       defined(CONFIG_I2C_MULTI_BUS) || CONFIG_IS_ENABLED(DM_I2C)
        U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
 #endif  /* CONFIG_I2C_MULTI_BUS */
 #if defined(CONFIG_I2C_EDID)
@@ -1979,7 +1979,7 @@ static struct cmd_tbl cmd_i2c_sub[] = {
        U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""),
        U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""),
        U_BOOT_CMD_MKENT(write, 6, 0, do_i2c_write, "", ""),
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        U_BOOT_CMD_MKENT(flags, 2, 1, do_i2c_flags, "", ""),
        U_BOOT_CMD_MKENT(olen, 2, 1, do_i2c_olen, "", ""),
 #endif
@@ -2036,13 +2036,13 @@ static int do_i2c(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 /***************************************************/
 #ifdef CONFIG_SYS_LONGHELP
 static char i2c_help_text[] =
-#if defined(CONFIG_SYS_I2C) || defined(CONFIG_DM_I2C)
+#if defined(CONFIG_SYS_I2C) || CONFIG_IS_ENABLED(DM_I2C)
        "bus [muxtype:muxaddr:muxchannel] - show I2C bus info\n"
        "i2c " /* That's the prefix for the crc32 command below. */
 #endif
        "crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
 #if defined(CONFIG_SYS_I2C) || \
-       defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C)
+       defined(CONFIG_I2C_MULTI_BUS) || CONFIG_IS_ENABLED(DM_I2C)
        "i2c dev [dev] - show or set current I2C bus\n"
 #endif  /* CONFIG_I2C_MULTI_BUS */
 #if defined(CONFIG_I2C_EDID)
@@ -2057,7 +2057,7 @@ static char i2c_help_text[] =
        "i2c read chip address[.0, .1, .2] length memaddress - read to memory\n"
        "i2c write memaddress chip address[.0, .1, .2] length [-s] - write memory\n"
        "          to I2C; the -s option selects bulk write in a single transaction\n"
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        "i2c flags chip [flags] - set or get chip flags\n"
        "i2c olen chip [offset_length] - set or get chip offset length\n"
 #endif