menu "General setup"
+config BROKEN
+ bool
+ help
+ This option cannot be enabled. It is used as dependency
+ for broken and incomplete features.
+
config LOCALVERSION
string "Local version - append to U-Boot release"
help
This option is enabled by default for U-Boot.
+config CC_COVERAGE
+ bool "Enable code coverage analysis"
+ depends on SANDBOX
+ help
+ Enabling this option will pass "--coverage" to gcc to compile
+ and link code instrumented for coverage analysis.
+
config DISTRO_DEFAULTS
bool "Select defaults suitable for booting general purpose Linux distributions"
- default y if ARCH_SUNXI || TEGRA
- default y if ARCH_LS2080A
- default y if ARCH_MESON
- default y if ARCH_ROCKCHIP
- default n
+ imply USE_BOOTCOMMAND
select CMD_BOOTZ if ARM && !ARM64
select CMD_BOOTI if ARM64
- select CMD_DHCP
- select CMD_PXE
+ select CMD_DHCP if CMD_NET
+ select CMD_PING if CMD_NET
+ select CMD_PXE if NET
+ select CMD_ENV_EXISTS
select CMD_EXT2
select CMD_EXT4
select CMD_FAT
select CMD_FS_GENERIC
- select CMD_MII
- select CMD_PING
- select CMD_PART
+ imply CMD_MII if NET
+ select CMD_PART if PARTITIONS
select HUSH_PARSER
+ select CMDLINE_EDITING
+ select AUTO_COMPLETE
+ select SYS_LONGHELP
+ select SUPPORT_RAW_INITRD
+ select ENV_VARS_UBOOT_CONFIG
help
Select this to enable various options and commands which are suitable
for building u-boot for booting general purpose Linux distributions.
+config ENV_VARS_UBOOT_CONFIG
+ bool "Add arch, board, vendor and soc variables to default environment"
+ help
+ Define this in order to add variables describing the
+ U-Boot build configuration to the default environment.
+ These will be named arch, cpu, board, vendor, and soc.
+ Enabling this option will cause the following to be defined:
+ - CONFIG_SYS_ARCH
+ - CONFIG_SYS_CPU
+ - CONFIG_SYS_BOARD
+ - CONFIG_SYS_VENDOR
+ - CONFIG_SYS_SOC
+
+config SYS_BOOT_GET_CMDLINE
+ bool "Enable kernel command line setup"
+ help
+ Enables allocating and saving kernel cmdline in space between
+ "bootm_low" and "bootm_low" + BOOTMAPSZ.
+
+config SYS_BOOT_GET_KBD
+ bool "Enable kernel board information setup"
+ help
+ Enables allocating and saving a kernel copy of the bd_info in
+ space between "bootm_low" and "bootm_low" + BOOTMAPSZ.
+
config SYS_MALLOC_F
bool "Enable malloc() pool before relocation"
default y if DM
config SYS_MALLOC_F_LEN
hex "Size of malloc() pool before relocation"
depends on SYS_MALLOC_F
+ default 0x1000 if AM33XX
default 0x400
help
Before relocation, memory is very limited on many platforms. Still,
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
+config SPL_SYS_MALLOC_F_LEN
+ hex "Size of malloc() pool in SPL before relocation"
+ depends on SYS_MALLOC_F
+ default SYS_MALLOC_F_LEN
+ help
+ Before relocation, memory is very limited on many platforms. Still,
+ we can provide a small malloc() pool if needed. Driver model in
+ particular needs this to operate, so that it can allocate the
+ initial serial device and any others that are needed.
+
+config TPL_SYS_MALLOC_F_LEN
+ hex "Size of malloc() pool in TPL before relocation"
+ depends on SYS_MALLOC_F
+ default SYS_MALLOC_F_LEN
+ help
+ Before relocation, memory is very limited on many platforms. Still,
+ we can provide a small malloc() pool if needed. Driver model in
+ particular needs this to operate, so that it can allocate the
+ initial serial device and any others that are needed.
+
menuconfig EXPERT
bool "Configure standard U-Boot features (expert users)"
default y
This can be used not only for 64bit SoCs, but also for
large physical address extention on 32bit SoCs.
+config BUILD_ROM
+ bool "Build U-Boot as BIOS replacement"
+ depends on X86
+ help
+ This option allows to build a ROM version of U-Boot.
+ The build process generally requires several binary blobs
+ which are not shipped in the U-Boot source tree.
+ Please, see doc/README.x86 for details.
+
endmenu # General setup
menu "Boot images"
+config ANDROID_BOOT_IMAGE
+ bool "Enable support for Android Boot Images"
+ default y if FASTBOOT
+ help
+ This enables support for booting images which use the Android
+ image format header.
+
config FIT
bool "Support Flattened Image Tree"
select MD5
bool "Enable signature verification of FIT uImages"
depends on DM
select RSA
+ select HASH
help
This option enables signature verification of FIT uImages,
using a hash signed and verified using RSA. If
depends on SPL
select SPL_OF_LIBFDT
+config SPL_FIT_PRINT
+ bool "Support FIT printing within SPL"
+ depends on SPL_FIT
+ help
+ Support printing the content of the fitImage in a verbose manner in SPL.
+
config SPL_FIT_SIGNATURE
bool "Enable signature verification of FIT firmware within SPL"
depends on SPL_DM
particular it can handle selecting from multiple device tree
and passing the correct one to U-Boot.
+config SPL_LOAD_FIT_FULL
+ bool "Enable SPL loading U-Boot as a FIT"
+ select SPL_FIT
+ help
+ Normally with the SPL framework a legacy image is generated as part
+ of the build. This contains U-Boot along with information as to
+ where it should be loaded. This option instead enables generation
+ of a FIT (Flat Image Tree) which provides more flexibility. In
+ particular it can handle selecting from multiple device tree
+ and passing the correct one to U-Boot.
+
config SPL_FIT_IMAGE_POST_PROCESS
bool "Enable post-processing of FIT artifacts after loading by the SPL"
- depends on SPL_LOAD_FIT && TI_SECURE_DEVICE
+ depends on SPL_LOAD_FIT
help
Allows doing any sort of manipulation to blobs after they got extracted
from the U-Boot FIT image like stripping off headers or modifying the
endif # FIT
+config IMAGE_FORMAT_LEGACY
+ bool "Enable support for the legacy image format"
+ default y if !FIT_SIGNATURE
+ help
+ This option enables the legacy image format. It is enabled by
+ default for backward compatibility, unless FIT_SIGNATURE is
+ set where it is disabled so that unsigned images cannot be
+ loaded. If a board needs the legacy image format support in this
+ case, enable it here.
+
config OF_BOARD_SETUP
bool "Set up board-specific details in device tree before boot"
depends on OF_LIBFDT
new boards should not use this option.
config SYS_TEXT_BASE
- depends on ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \
- (M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE || MIPS || \
- ARCH_ZYNQ || ARCH_KEYSTONE
+ depends on !NIOS2 && !XTENSA
depends on !EFI_APP
+ default 0x80800000 if ARCH_OMAP2PLUS
+ default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
+ default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
+ default 0x42e00000 if ARCH_SUNXI && MACH_SUN8I_V3S
hex "Text Base"
help
- TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture
+ The address in memory that U-Boot will be running from, initially.
+
config SYS_CLK_FREQ
source "dts/Kconfig"
+source "env/Kconfig"
+
source "net/Kconfig"
source "drivers/Kconfig"
source "lib/Kconfig"
source "test/Kconfig"
-
-source "scripts/Kconfig"
projects / J-u-boot.git / blobdiff