#ifndef __IGEP00X0_H
#define __IGEP00X0_H
-#ifdef CONFIG_BOOT_NAND
-#define CONFIG_NAND
-#endif
-
#define CONFIG_NR_DRAM_BANKS 2
+#define CONFIG_NAND
#include <configs/ti_omap3_common.h>
#include <asm/mach-types.h>
/*
- * Display CPU and Board information
+ * We are only ever GP parts and will utilize all of the "downloaded image"
+ * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
*/
-#define CONFIG_DISPLAY_CPUINFO 1
-#define CONFIG_DISPLAY_BOARDINFO 1
+#undef CONFIG_SPL_TEXT_BASE
+#define CONFIG_SPL_TEXT_BASE 0x40200000
#define CONFIG_MISC_INIT_R
#define CONFIG_REVISION_TAG 1
-/* define to enable boot progress via leds */
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
- (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#define CONFIG_SHOW_BOOT_PROGRESS
+/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
+#if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
+#define CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define CONFIG_GPIO_LED
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
+#define RED_LED_GPIO 27
+#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
+#define RED_LED_GPIO 16
+#else
+#error "status LED not defined for this machine."
+#endif
+#define RED_LED_DEV 0
+#define STATUS_LED_BIT RED_LED_GPIO
+#define STATUS_LED_STATE STATUS_LED_ON
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT RED_LED_DEV
#endif
/* GPIO banks */
#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
/* USB */
-#define CONFIG_MUSB_UDC 1
+#define CONFIG_USB_MUSB_UDC 1
#define CONFIG_USB_OMAP3 1
#define CONFIG_TWL4030_USB 1
/* USB device configuration */
#define CONFIG_USB_DEVICE 1
#define CONFIG_USB_TTY 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
/* Change these to suit your needs */
#define CONFIG_USBD_VENDORID 0x0451
#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
#define CONFIG_USBD_PRODUCT_NAME "IGEP"
-#define CONFIG_CMD_CACHE
-#ifdef CONFIG_BOOT_ONENAND
-#define CONFIG_CMD_ONENAND /* ONENAND support */
-#endif
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
- (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
-#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
-#endif
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_NFS /* NFS support */
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_ONENAND
-/*#undef CONFIG_ENV_IS_NOWHERE*/
+#ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "usbtty=cdc_acm\0" \
- "loadaddr=0x82000000\0" \
- "dtbaddr=0x81600000\0" \
- "bootdir=/boot\0" \
- "bootfile=zImage\0" \
- "usbtty=cdc_acm\0" \
- "console=ttyO2,115200n8\0" \
- "mpurate=auto\0" \
- "vram=12M\0" \
- "dvimode=1024x768MR-16@60\0" \
- "defaultdisplay=dvi\0" \
- "mmcdev=0\0" \
- "mmcroot=/dev/mmcblk0p2 rw\0" \
- "mmcrootfstype=ext4 rootwait\0" \
- "nandroot=/dev/mtdblock4 rw\0" \
- "nandrootfstype=jffs2\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "mpurate=${mpurate} " \
- "vram=${vram} " \
- "omapfb.mode=dvi:${dvimode} " \
- "omapfb.debug=y " \
- "omapdss.def_disp=${defaultdisplay} " \
- "root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
- "nandargs=setenv bootargs console=${console} " \
- "mpurate=${mpurate} " \
- "vram=${vram} " \
- "omapfb.mode=dvi:${dvimode} " \
- "omapfb.debug=y " \
- "omapdss.def_disp=${defaultdisplay} " \
- "root=${nandroot} " \
- "rootfstype=${nandrootfstype}\0" \
- "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
- "importbootenv=echo Importing environment from mmc ...; " \
- "env import -t $loadaddr $filesize\0" \
- "loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
- "loadfdt=load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "bootz ${loadaddr}\0" \
- "mmcbootfdt=echo Booting with DT from mmc ...; " \
- "bootz ${loadaddr} - ${dtbaddr}\0" \
- "nandboot=echo Booting from onenand ...; " \
- "run nandargs; " \
- "onenand read ${loadaddr} 280000 400000; " \
- "bootz ${loadaddr}\0" \
-
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "echo SD/MMC found on device ${mmcdev};" \
- "if run loadbootenv; then " \
- "run importbootenv;" \
- "fi;" \
- "if test -n $uenvcmd; then " \
- "echo Running uenvcmd ...;" \
- "run uenvcmd;" \
- "fi;" \
- "if run loadzimage; then " \
- "if test -n $dtbfile; then " \
- "if run loadfdt; then " \
- "run mmcbootfdt;" \
- "fi;" \
- "fi;" \
- "run mmcboot;" \
- "fi;" \
- "fi;" \
- "run nandboot;" \
+/* Environment */
+#define ENV_DEVICE_SETTINGS \
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0"
-/*
- * FLASH and environment organization
- */
+#define MEM_LAYOUT_SETTINGS \
+ DEFAULT_LINUX_BOOT_ENV \
+ "scriptaddr=0x87E00000\0" \
+ "pxefile_addr_r=0x87F00000\0"
-#ifdef CONFIG_BOOT_ONENAND
-#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0)
-#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
+#include <config_distro_bootcmd.h>
-#define CONFIG_ENV_IS_IN_ONENAND 1
-#define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */
-#define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET
-#endif
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ ENV_DEVICE_SETTINGS \
+ MEM_LAYOUT_SETTINGS \
+ BOOTENV
-#ifdef CONFIG_NAND
-#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
-#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */
-#define CONFIG_ENV_ADDR NAND_ENV_OFFSET
#endif
/*
#if defined(CONFIG_CMD_NET)
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE 0x2C000000
+#define CONFIG_SMC911X_BASE 0x2C000000
#endif /* (CONFIG_CMD_NET) */
-/* OneNAND boot config */
-#ifdef CONFIG_BOOT_ONENAND
-#define CONFIG_SPL_ONENAND_SUPPORT
-#define CONFIG_SYS_ONENAND_U_BOOT_OFFS 0x80000
-#define CONFIG_SYS_ONENAND_PAGE_SIZE 2048
-#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x80000
-#define CONFIG_SPL_ONENAND_LOAD_SIZE \
- (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
+#define CONFIG_RBTREE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_SYS_MTDPARTS_RUNTIME
-#endif
+/* OneNAND config */
+#define CONFIG_USE_ONENAND_BOARD_INIT
+#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
+#define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024)
-/* NAND boot config */
-#ifdef CONFIG_NAND
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
+/* NAND config */
+#define CONFIG_SPL_OMAP3_ID_NAND
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
-#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
- 10, 11, 12, 13}
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
+ 10, 11, 12, 13, 14, 15, 16, 17, \
+ 18, 19, 20, 21, 22, 23, 24, 25, \
+ 26, 27, 28, 29, 30, 31, 32, 33, \
+ 34, 35, 36, 37, 38, 39, 40, 41, \
+ 42, 43, 44, 45, 46, 47, 48, 49, \
+ 50, 51, 52, 53, 54, 55, 56, 57, }
#define CONFIG_SYS_NAND_ECCSIZE 512
-#define CONFIG_SYS_NAND_ECCBYTES 3
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
-/* NAND: SPL falcon mode configs */
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS 0x240000
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
-#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
-#endif
-#endif
+#define CONFIG_SYS_NAND_ECCBYTES 14
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_BCH
+
+/* UBI configuration */
+#define CONFIG_SPL_UBI 1
+#define CONFIG_SPL_UBI_MAX_VOL_LEBS 256
+#define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024)
+#define CONFIG_SPL_UBI_MAX_PEBS 4096
+#define CONFIG_SPL_UBI_VOL_IDS 8
+#define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
+#define CONFIG_SPL_UBI_LOAD_KERNEL_ID 3
+#define CONFIG_SPL_UBI_LOAD_ARGS_ID 4
+#define CONFIG_SPL_UBI_PEB_OFFSET 4
+#define CONFIG_SPL_UBI_VID_OFFSET 512
+#define CONFIG_SPL_UBI_LEB_START 2048
+#define CONFIG_SPL_UBI_INFO_ADDR 0x88080000
+
+/* environment organization */
+#define CONFIG_ENV_IS_IN_UBI 1
+#define CONFIG_ENV_UBI_PART "UBI"
+#define CONFIG_ENV_UBI_VOLUME "config"
+#define CONFIG_ENV_UBI_VOLUME_REDUND "config_r"
+#define CONFIG_UBI_SILENCE_MSG 1
+#define CONFIG_UBIFS_SILENCE_MSG 1
+#define CONFIG_ENV_SIZE (32*1024)
#endif /* __IGEP00X0_H */
projects / J-u-boot.git / blobdiff