# This Dockerfile is used to build an image containing basic stuff to be used
# to build U-Boot and run our test suites.
-FROM ubuntu:jammy-20240227
-LABEL Description=" This image is for building U-Boot inside a container"
+FROM ubuntu:jammy-20240911.1
+LABEL org.opencontainers.image.description=" This image is for building U-Boot inside a container"
+
+# Used by docker to set the target platform: valid values are linux/arm64/v8
+# and linux/amd64
+ARG TARGETPLATFORM
+
+# Used by docker to set the build platform: the only valid value is linux/amd64
+ARG BUILDPLATFORM
# Make sure apt is happy
ENV DEBIAN_FRONTEND=noninteractive
+# Set architectures to build for (leaving out ARM which is an exception)
+ENV ARCHS="aarch64 arc i386 m68k mips microblaze nios2 powerpc riscv64 riscv32 sh2 x86_64"
+
+# Mirror containing the toolchains
+ENV MIRROR=https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin
+
+# Toolchain version
+ENV TCVER=13.2.0
+
+RUN echo "Building on $BUILDPLATFORM, for target $TARGETPLATFORM"
+
# Add LLVM repository
-RUN apt-get update && apt-get install -y gnupg2 wget xz-utils && rm -rf /var/lib/apt/lists/*
+RUN --mount=type=cache,target=/var/cache/apt,sharing=locked \
+ --mount=type=cache,target=/var/lib/apt,sharing=locked \
+ apt-get update && apt-get install -y gnupg2 wget xz-utils
RUN wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | apt-key add -
RUN echo deb http://apt.llvm.org/jammy/ llvm-toolchain-jammy-17 main | tee /etc/apt/sources.list.d/llvm.list
-# Manually install the kernel.org "Crosstool" based toolchains for gcc-13.2.0
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-aarch64-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-arc-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-arm-linux-gnueabi.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-i386-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-m68k-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-mips-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-microblaze-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-nios2-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-powerpc-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-riscv64-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-riscv32-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-sh2-linux.tar.xz | tar -C /opt -xJ
+# Create a list of URLs to process, then pass them into a 'while read' loop
+RUN if [ "$TARGETPLATFORM" = "linux/amd64" ]; then HOSTARCH=x86_64; else HOSTARCH=arm64; fi; ( \
+ # Manually install the kernel.org "Crosstool"-based toolchains
+ for arch in $ARCHS; do \
+ echo $MIRROR/$HOSTARCH/$TCVER/${HOSTARCH}-gcc-$TCVER-nolibc-${arch}-linux.tar.xz; \
+ done; \
+ \
+ # Deal with ARM, which has a 'gnueabi' suffix
+ echo $MIRROR/${HOSTARCH}/$TCVER/${HOSTARCH}-gcc-$TCVER-nolibc-arm-linux-gnueabi.tar.xz; \
+ \
+ ) | while read url; do \
+ # Read the URL and unpack it into /opt
+ wget -O - $url | tar -C /opt -xJ; \
+ done
# Manually install other toolchains
-RUN wget -O - https://github.com/foss-xtensa/toolchain/releases/download/2020.07/x86_64-2020.07-xtensa-dc233c-elf.tar.gz | tar -C /opt -xz
+RUN if [ "$TARGETPLATFORM" = "linux/amd64" ]; then \
+ wget -O - https://github.com/foss-xtensa/toolchain/releases/download/2020.07/x86_64-2020.07-xtensa-dc233c-elf.tar.gz | tar -C /opt -xz; \
+ fi
# Update and install things from apt now
-RUN apt-get update && apt-get install -y \
+RUN --mount=type=cache,target=/var/cache/apt,sharing=locked \
+ --mount=type=cache,target=/var/lib/apt,sharing=locked \
+ apt-get update && apt-get install -y \
automake \
autopoint \
bc \
flex \
gawk \
gdisk \
+ gettext \
git \
gnu-efi \
gnutls-dev \
graphviz \
- grub-efi-amd64-bin \
- grub-efi-ia32-bin \
help2man \
iasl \
imagemagick \
iputils-ping \
- libc6-i386 \
libconfuse-dev \
libgit2-dev \
libjson-glib-dev \
libtool \
libudev-dev \
libusb-1.0-0-dev \
- linux-image-kvm \
+ linux-image-generic \
lzma-alone \
lzop \
mount \
vboot-utils \
xilinx-bootgen \
xxd \
- zip \
- && rm -rf /var/lib/apt/lists/*
+ zip
# Make kernels readable for libguestfs tools to work correctly
RUN chmod +r /boot/vmlinu*
# Build GRUB UEFI targets for ARM & RISC-V, 32-bit and 64-bit
RUN git clone git://git.savannah.gnu.org/grub.git /tmp/grub && \
cd /tmp/grub && \
- git checkout grub-2.06 && \
+ git checkout grub-2.12 && \
git config --global user.name "GitLab CI Runner" && \
- git cherry-pick 049efdd72eb7baa7b2bf8884391ee7fe650da5a0 && \
- git cherry-pick 403d6540cd608b2706cfa0cb4713f7e4b490ff45 && \
./bootstrap && \
mkdir -p /opt/grub && \
./configure --target=aarch64 --with-platform=efi \
CC=gcc \
- TARGET_CC=/opt/gcc-13.2.0-nolibc/aarch64-linux/bin/aarch64-linux-gcc \
- TARGET_OBJCOPY=/opt/gcc-13.2.0-nolibc/aarch64-linux/bin/aarch64-linux-objcopy \
- TARGET_STRIP=/opt/gcc-13.2.0-nolibc/aarch64-linux/bin/aarch64-linux-strip \
- TARGET_NM=/opt/gcc-13.2.0-nolibc/aarch64-linux/bin/aarch64-linux-nm \
- TARGET_RANLIB=/opt/gcc-13.2.0-nolibc/aarch64-linux/bin/aarch64-linux-ranlib && \
- make && \
+ TARGET_CC=/opt/gcc-${TCVER}-nolibc/aarch64-linux/bin/aarch64-linux-gcc \
+ TARGET_OBJCOPY=/opt/gcc-${TCVER}-nolibc/aarch64-linux/bin/aarch64-linux-objcopy \
+ TARGET_STRIP=/opt/gcc-${TCVER}-nolibc/aarch64-linux/bin/aarch64-linux-strip \
+ TARGET_NM=/opt/gcc-${TCVER}-nolibc/aarch64-linux/bin/aarch64-linux-nm \
+ TARGET_RANLIB=/opt/gcc-${TCVER}-nolibc/aarch64-linux/bin/aarch64-linux-ranlib && \
+ make -j$(nproc) && \
./grub-mkimage -O arm64-efi -o /opt/grub/grubaa64.efi --prefix= -d \
grub-core cat chain configfile echo efinet ext2 fat halt help linux \
lsefisystab loadenv lvm minicmd normal part_msdos part_gpt reboot \
make clean && \
./configure --target=arm --with-platform=efi \
CC=gcc \
- TARGET_CC=/opt/gcc-13.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-gcc \
- TARGET_OBJCOPY=/opt/gcc-13.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-objcopy \
- TARGET_STRIP=/opt/gcc-13.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-strip \
- TARGET_NM=/opt/gcc-13.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-nm \
- TARGET_RANLIB=/opt/gcc-13.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-ranlib && \
- make && \
+ TARGET_CC=/opt/gcc-${TCVER}-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-gcc \
+ TARGET_OBJCOPY=/opt/gcc-${TCVER}-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-objcopy \
+ TARGET_STRIP=/opt/gcc-${TCVER}-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-strip \
+ TARGET_NM=/opt/gcc-${TCVER}-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-nm \
+ TARGET_RANLIB=/opt/gcc-${TCVER}-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-ranlib && \
+ make -j$(nproc) && \
./grub-mkimage -O arm-efi -o /opt/grub/grubarm.efi --prefix= -d \
grub-core cat chain configfile echo efinet ext2 fat halt help linux \
lsefisystab loadenv lvm minicmd normal part_msdos part_gpt reboot \
make clean && \
./configure --target=riscv64 --with-platform=efi \
CC=gcc \
- TARGET_CC=/opt/gcc-13.2.0-nolibc/riscv64-linux/bin/riscv64-linux-gcc \
- TARGET_OBJCOPY=/opt/gcc-13.2.0-nolibc/riscv64-linux/bin/riscv64-linux-objcopy \
- TARGET_STRIP=/opt/gcc-13.2.0-nolibc/riscv64-linux/bin/riscv64-linux-strip \
- TARGET_NM=/opt/gcc-13.2.0-nolibc/riscv64-linux/bin/riscv64-linux-nm \
- TARGET_RANLIB=/opt/gcc-13.2.0-nolibc/riscv64-linux/bin/riscv64-linux-ranlib && \
- make && \
+ TARGET_CC=/opt/gcc-${TCVER}-nolibc/riscv64-linux/bin/riscv64-linux-gcc \
+ TARGET_OBJCOPY=/opt/gcc-${TCVER}-nolibc/riscv64-linux/bin/riscv64-linux-objcopy \
+ TARGET_STRIP=/opt/gcc-${TCVER}-nolibc/riscv64-linux/bin/riscv64-linux-strip \
+ TARGET_NM=/opt/gcc-${TCVER}-nolibc/riscv64-linux/bin/riscv64-linux-nm \
+ TARGET_RANLIB=/opt/gcc-${TCVER}-nolibc/riscv64-linux/bin/riscv64-linux-ranlib && \
+ make -j$(nproc) && \
./grub-mkimage -O riscv64-efi -o /opt/grub/grubriscv64.efi --prefix= -d \
grub-core cat chain configfile echo efinet ext2 fat halt help linux \
lsefisystab loadenv lvm minicmd normal part_msdos part_gpt reboot \
search search_fs_file search_fs_uuid search_label serial sleep test \
true && \
+ make clean && \
+ ./configure --target=i386 --with-platform=efi \
+ CC=gcc \
+ TARGET_CC=/opt/gcc-${TCVER}-nolibc/i386-linux/bin/i386-linux-gcc \
+ TARGET_OBJCOPY=/opt/gcc-${TCVER}-nolibc/i386-linux/bin/i386-linux-objcopy \
+ TARGET_STRIP=/opt/gcc-${TCVER}-nolibc/i386-linux/bin/i386-linux-strip \
+ TARGET_NM=/opt/gcc-${TCVER}-nolibc/i386-linux/bin/i386-linux-nm \
+ TARGET_RANLIB=/opt/gcc-${TCVER}-nolibc/i386-linux/bin/i386-linux-ranlib && \
+ make -j$(nproc) && \
+ ./grub-mkimage -O i386-efi -o /opt/grub/grub_x86.efi --prefix= -d \
+ grub-core normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd && \
+ make clean && \
+ ./configure --target=x86_64 --with-platform=efi \
+ CC=gcc \
+ TARGET_CC=/opt/gcc-${TCVER}-nolibc/x86_64-linux/bin/x86_64-linux-gcc \
+ TARGET_OBJCOPY=/opt/gcc-${TCVER}-nolibc/x86_64-linux/bin/x86_64-linux-objcopy \
+ TARGET_STRIP=/opt/gcc-${TCVER}-nolibc/x86_64-linux/bin/x86_64-linux-strip \
+ TARGET_NM=/opt/gcc-${TCVER}-nolibc/x86_64-linux/bin/x86_64-linux-nm \
+ TARGET_RANLIB=/opt/gcc-${TCVER}-nolibc/x86_64-linux/bin/x86_64-linux-ranlib && \
+ make -j$(nproc) && \
+ ./grub-mkimage -O x86_64-efi -o /opt/grub/grub_x64.efi --prefix= -d \
+ grub-core normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd && \
rm -rf /tmp/grub
RUN git clone https://gitlab.com/qemu-project/qemu.git /tmp/qemu && \
cd /tmp/tf-a/ && \
git checkout v2.10.0 && \
cd tools/fiptool && \
- make && \
+ make -j$(nproc) && \
mkdir -p /usr/local/bin && \
cp fiptool /usr/local/bin && \
rm -rf /tmp/tf-a
rm -rf /tmp/trace
# Build coreboot
-RUN wget -O - https://coreboot.org/releases/coreboot-4.22.01.tar.xz | tar -C /tmp -xJ && \
- cd /tmp/coreboot-4.22.01 && \
+RUN wget -O - https://coreboot.org/releases/coreboot-24.08.tar.xz | tar -C /tmp -xJ && \
+ cd /tmp/coreboot-24.08 && \
make crossgcc-i386 CPUS=$(nproc) && \
make -C payloads/coreinfo olddefconfig && \
make -C payloads/coreinfo && \
make olddefconfig && \
+ echo CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y | tee -a .config && \
+ echo CONFIG_USE_OPTION_TABLE=y | tee -a .config && \
+ make olddefconfig && \
make -j $(nproc) && \
sudo mkdir /opt/coreboot && \
sudo cp build/coreboot.rom build/cbfstool /opt/coreboot/
rm -rf /tmp/venv /tmp/*-requirements.txt
# Create the buildman config file
-RUN /bin/echo -e "[toolchain]\nroot = /usr" > ~/.buildman
-RUN /bin/echo -e "kernelorg = /opt/gcc-13.2.0-nolibc/*" >> ~/.buildman
-RUN /bin/echo -e "\n[toolchain-prefix]\nxtensa = /opt/2020.07/xtensa-dc233c-elf/bin/xtensa-dc233c-elf-" >> ~/.buildman;
+RUN /bin/echo -e "[toolchain]\nkernelorg = /opt/gcc-${TCVER}-nolibc/*" > ~/.buildman
+RUN /bin/echo -e "root = /usr" >> ~/.buildman
+RUN if [ "$TARGETPLATFORM" = "linux/amd64" ]; then \
+ /bin/echo -e "\n[toolchain-prefix]\nxtensa = /opt/2020.07/xtensa-dc233c-elf/bin/xtensa-dc233c-elf-" >> ~/.buildman; \
+ fi
+RUN if [ "$TARGETPLATFORM" = "linux/arm64" ]; then \
+ /bin/echo -e "\n[toolchain-prefix]\naarch64 = /opt/gcc-${TCVER}-nolibc/aarch64-linux/bin/aarch64-linux-" >> ~/.buildman; \
+ fi
RUN /bin/echo -e "\n[toolchain-alias]\nsh = sh2" >> ~/.buildman
-RUN /bin/echo -e "\nsandbox = x86_64" >> ~/.buildman
RUN /bin/echo -e "\nx86 = i386" >> ~/.buildman;
# Add mkbootimg tool
RUN git clone https://android.googlesource.com/platform/system/tools/mkbootimg /home/uboot/mkbootimg
-ENV PYTHONPATH "${PYTHONPATH}:/home/uboot/mkbootimg"
+ENV PYTHONPATH="${PYTHONPATH}:/home/uboot/mkbootimg"
projects / J-u-boot.git / blobdiff