* TI DA830 EVM
+* TI DA850 EVM
+
* DM355 based Leopard board
* DM644x based schmoogie board
make da830evm_config
make
+* TI DA850 EVM:
+
+make da850evm_config
+make
+
* DM355 based Leopard board:
make davinci_dm355leopard_config
The programmers and UBL are always released as part of any standard TI
software release associated with an SOC.
+Alternative boot method (DA850 EVM only):
+For the DA850 EVM an SPL (secondary program loader, see doc/README.SPL)
+is provided to load U-Boot directly from SPI flash. In this case, the
+SPL does the low level initialization that is otherwise done by the SPL.
+To build U-Boot with this SPL, do
+make da850evm_config
+make u-boot.ais
+and program the resulting u-boot.ais file to the SPI flash of the DA850 EVM.
+
+Environment Variables
+=====================
+
+The DA850 EVM allows the user to specify the maximum cpu clock allowed by the
+silicon, in Hz, via an environment variable "maxcpuclk".
+
+The maximum clock rate allowed depends on the silicon populated on the EVM.
+Please make sure you understand the restrictions placed on this clock in the
+device specific datasheet before setting up this variable. This information is
+passed to the Linux kernel using the ATAG_REVISION atag.
+
+If "maxcpuclk" is not defined, the configuration CONFIG_DA850_EVM_MAX_CPU_CLK
+is used to obtain this information.
+
Links
=====
6) TI DA830 EVM
http://focus.ti.com/apps/docs/gencontent.tsp?appId=1&contentId=52385
http://www.spectrumdigital.com/product_info.php?cPath=37&products_id=214
+
+7) TI DA850 EVM
+http://focus.ti.com/docs/prod/folders/print/omap-l138.html
+http://www.logicpd.com/products/development-kits/zoom-omap-l138-evm-development-kit
+
+Davinci special defines
+=======================
+
+CONFIG_SYS_DV_NOR_BOOT_CFG: AM18xx based boards, booting in NOR Boot mode
+ need a "NOR Boot Configuration Word" stored
+ in the NOR Flash. This define adds this.
+ More Info about this, see:
+ spraba5a.pdf chapter 3.1