arm: dts: imx8m*-venice: add gpio hog support

[J-u-boot.git] / configs / mx6sxsabreauto_defconfig

diff --git a/configs/mx6sxsabreauto_defconfig b/configs/mx6sxsabreauto_defconfig
index be20be2ad6860ab3aebda9f2e4c2b47522879f82..30194a8cde48e5a5b8e5b70ac0b0810b665310f8 100644 (file)
--- a/configs/mx6sxsabreauto_defconfig
+++ b/configs/mx6sxsabreauto_defconfig
@@ -1,15 +1,18 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_SYS_MALLOC_LEN=0x300000
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x80000
+CONFIG_MX6SX=y
 CONFIG_TARGET_MX6SXSABREAUTO=y
 CONFIG_DM_GPIO=y
-CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="imx6sx-sabreauto"
 # CONFIG_CMD_BMODE is not set
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabreauto/imximage.cfg"
 CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_BOUNCE_BUFFER=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_FLASH is not set
@@ -31,21 +34,26 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6sx-sabreauto"
+CONFIG_ENV_OVERWRITE=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="FEC"
+CONFIG_BOUNCE_BUFFER=y
 CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
+CONFIG_SYS_I2C_MXC=y
 CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_MXS=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=40000000
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
@@ -55,11 +63,12 @@ CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_PFUZE100=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_MXC_UART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_QSPI=y
+CONFIG_IMX_THERMAL=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y