configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / bcm_ns3_defconfig

diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 6b7f42fe1c2143983a1a601eb8160a09bb60cfca..a9236161ca1017f23821fcbbb8e03ebdf790903f 100644 (file)
--- a/configs/bcm_ns3_defconfig
+++ b/configs/bcm_ns3_defconfig
@@ -1,11 +1,15 @@
 CONFIG_ARM=y
 CONFIG_GIC_V3_ITS=y
 CONFIG_TARGET_BCMNS3=y
-CONFIG_SYS_TEXT_BASE=0xFF000000
+CONFIG_TEXT_BASE=0xFF000000
 CONFIG_SYS_MALLOC_LEN=0xc00000
+CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x0
 CONFIG_ENV_SIZE=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="ns3-board"
+CONFIG_SYS_BOOTM_LEN=0x1800000
 CONFIG_SYS_LOAD_ADDR=0x80080000
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
@@ -14,6 +18,9 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_LEGACY_IMAGE_FORMAT=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run flash_pending_rfs_imgs;run fastboot_nitro && run bootcmd_mmc_fits || run bootcmd_usb || run bootcmd_pxe"
+CONFIG_SYS_PBSIZE=1049
 CONFIG_LOGLEVEL=7
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SILENT_U_BOOT_ONLY=y
@@ -33,9 +40,11 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 # CONFIG_DOS_PARTITION is not set
 CONFIG_OF_CONTROL=y
-CONFIG_DM=y
+CONFIG_USE_HOSTNAME=y
+CONFIG_HOSTNAME="NS3"
 CONFIG_CLK=y
 CONFIG_CLK_CCF=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_IPROC=y
@@ -48,4 +57,3 @@ CONFIG_OPTEE=y
 # CONFIG_OPTEE_TA_AVB is not set
 CONFIG_WDT=y
 CONFIG_WDT_SP805=y
-CONFIG_SPL_OF_LIBFDT=y