+/* SPDX-License-Identifier: GPL-2.0+ */
/*
*
* X-Powers AXP221 Power Management IC driver
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
-#define AXP221_CHIP_ADDR 0x68
-#define AXP221_CTRL_ADDR 0x3e
-#define AXP221_INIT_DATA 0x3e
-
-#define AXP223_DEVICE_ADDR 0x3a3
-#define AXP223_RUNTIME_ADDR 0x2d
-
/* Page 0 addresses */
-#define AXP221_POWER_STATUS 0x00
-#define AXP221_POWER_STATUS_VBUS_AVAIL (1 << 5)
-#define AXP221_POWER_STATUS_VBUS_USABLE (1 << 4)
#define AXP221_CHIP_ID 0x03
#define AXP221_OUTPUT_CTRL1 0x10
#define AXP221_OUTPUT_CTRL1_DCDC0_EN (1 << 0)
#define AXP221_ALDO1_CTRL 0x28
#define AXP221_ALDO2_CTRL 0x29
#define AXP221_ALDO3_CTRL 0x2a
-#define AXP221_VBUS_IPSOUT 0x30
-#define AXP221_VBUS_IPSOUT_DRIVEBUS (1 << 2)
-#define AXP221_MISC_CTRL 0x8f
-#define AXP221_MISC_CTRL_N_VBUSEN_FUNC (1 << 4)
+#define AXP221_SHUTDOWN 0x32
+#define AXP221_SHUTDOWN_POWEROFF (1 << 7)
#define AXP221_PAGE 0xff
/* Page 1 addresses */
#define AXP221_SID 0x20
-/* We support vbus detection */
-#define AXP_VBUS_DETECT
-
-/* We support drivebus control */
-#define AXP_DRIVEBUS
-
-int axp221_set_dcdc1(unsigned int mvolt);
-int axp221_set_dcdc2(unsigned int mvolt);
-int axp221_set_dcdc3(unsigned int mvolt);
-int axp221_set_dcdc4(unsigned int mvolt);
-int axp221_set_dcdc5(unsigned int mvolt);
-int axp221_set_dldo1(unsigned int mvolt);
-int axp221_set_dldo2(unsigned int mvolt);
-int axp221_set_dldo3(unsigned int mvolt);
-int axp221_set_dldo4(unsigned int mvolt);
-int axp221_set_aldo1(unsigned int mvolt);
-int axp221_set_aldo2(unsigned int mvolt);
-int axp221_set_aldo3(unsigned int mvolt);
-int axp221_set_eldo(int eldo_num, unsigned int mvolt);
-int axp221_init(void);
-int axp221_get_sid(unsigned int *sid);
-int axp_get_vbus(void);
-int axp_drivebus_enable(void);
-int axp_drivebus_disable(void);
+/* For axp_gpio.c */
+#define AXP_POWER_STATUS 0x00
+#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5)
+#define AXP_VBUS_IPSOUT 0x30
+#define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2)
+#define AXP_MISC_CTRL 0x8f
+#define AXP_MISC_CTRL_N_VBUSEN_FUNC (1 << 4)
+#define AXP_GPIO0_CTRL 0x90
+#define AXP_GPIO1_CTRL 0x92
+#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
+#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
+#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
+#define AXP_GPIO_STATE 0x94
+#define AXP_GPIO_STATE_OFFSET 0