* (C) Copyright 2003
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
/*
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
#define CONFIG_DBAU1X00 1
#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */
+#define CONFIG_DISPLAY_BOARDINFO
+
#ifdef CONFIG_DBAU1000
/* Also known as Merlot */
#define CONFIG_SOC_AU1000 1
#endif
#endif
-#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */
-
#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
#define CONFIG_BAUDRATE 115200
/* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND "bootp;bootm"
#endif /* CONFIG_DBAU1550 */
-
/*
* BOOTP options
*/
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
-
/*
* Command line configuration.
*/
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_ENV
-#undef CONFIG_CMD_FAT
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_RUN
-
#ifdef CONFIG_DBAU1550
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_NET
-
-#undef CONFIG_CMD_I2C
#undef CONFIG_CMD_IDE
-#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_PCMCIA
#else
#define CONFIG_CMD_IDE
-#define CONFIG_CMD_DHCP
-
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
#endif
-
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "DbAu1xx0 # " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args*/
+#define CONFIG_SYS_MALLOC_LEN 128*1024
-#define CFG_MALLOC_LEN 128*1024
+#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
-#define CFG_BOOTPARAMS_LEN 128*1024
+#define CONFIG_SYS_MHZ 396
-#define CFG_MHZ 396
-
-#if (CFG_MHZ % 12) != 0
+#if (CONFIG_SYS_MHZ % 12) != 0
#error "Invalid CPU frequency - must be multiple of 12!"
#endif
-#define CFG_MIPS_TIMER_FREQ (CFG_MHZ * 1000000)
-
-#define CFG_HZ 1000
+#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-#define CFG_SDRAM_BASE 0x80000000 /* Cached addr */
+#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
-#define CFG_LOAD_ADDR 0x81000000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */
-#define CFG_MEMTEST_START 0x80100000
-#define CFG_MEMTEST_END 0x80800000
+#define CONFIG_SYS_MEMTEST_START 0x80100000
+#define CONFIG_SYS_MEMTEST_END 0x80800000
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
#ifdef CONFIG_DBAU1550
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT (512) /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT (512) /* max number of sectors on one chip */
#define PHYS_FLASH_1 0xb8000000 /* Flash Bank #1 */
#define PHYS_FLASH_2 0xbc000000 /* Flash Bank #2 */
#else /* CONFIG_DBAU1550 */
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
#define PHYS_FLASH_1 0xbec00000 /* Flash Bank #1 */
#define PHYS_FLASH_2 0xbfc00000 /* Flash Bank #2 */
#endif /* CONFIG_DBAU1550 */
-#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
+#define CONFIG_SYS_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
-#define CFG_FLASH_CFI 1
-#define CFG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_CFI 1
+#define CONFIG_FLASH_CFI_DRIVER 1
-/* The following #defines are needed to get flash environment right */
-#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MONITOR_LEN (192 << 10)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (192 << 10)
-#define CFG_INIT_SP_OFFSET 0x400000
+#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
/* We boot from this flash, selected with dip switch */
-#define CFG_FLASH_BASE PHYS_FLASH_2
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_2
/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-#define CFG_ENV_IS_NOWHERE 1
+#define CONFIG_ENV_IS_NOWHERE 1
/* Address and size of Primary Environment Sector */
-#define CFG_ENV_ADDR 0xB0030000
-#define CFG_ENV_SIZE 0x10000
+#define CONFIG_ENV_ADDR 0xB0030000
+#define CONFIG_ENV_SIZE 0x10000
#define CONFIG_FLASH_16BIT
#define CONFIG_NR_DRAM_BANKS 2
-#define CONFIG_NET_MULTI
-
#ifdef CONFIG_DBAU1550
#define MEM_SIZE 192
#else
#ifndef CONFIG_DBAU1550
/*---ATA PCMCIA ------------------------------------*/
-#define CFG_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
-#define CFG_PCMCIA_MEM_ADDR 0x20000000
+#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
+#define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000
#define CONFIG_PCMCIA_SLOT_A
#define CONFIG_ATAPI 1
#define CONFIG_IDE_PCMCIA 1
/* We only support one slot for now */
-#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
#undef CONFIG_IDE_LED /* LED for ide not supported */
#undef CONFIG_IDE_RESET /* reset for ide not supported */
-#define CFG_ATA_IDE0_OFFSET 0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
/* Offset for data I/O */
-#define CFG_ATA_DATA_OFFSET 8
+#define CONFIG_SYS_ATA_DATA_OFFSET 8
/* Offset for normal register accesses */
-#define CFG_ATA_REG_OFFSET 0
+#define CONFIG_SYS_ATA_REG_OFFSET 0
/* Offset for alternate registers */
-#define CFG_ATA_ALT_OFFSET 0x0100
+#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
#endif /* CONFIG_DBAU1550 */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 16384
-#define CFG_ICACHE_SIZE 16384
-#define CFG_CACHELINE_SIZE 32
+#define CONFIG_SYS_DCACHE_SIZE 16384
+#define CONFIG_SYS_ICACHE_SIZE 16384
+#define CONFIG_SYS_CACHELINE_SIZE 32
#endif /* __CONFIG_H */
projects / J-u-boot.git / blobdiff