sunxi: Move SUNXI_GMAC to Kconfig

[J-u-boot.git] / configs / A20-OLinuXino-Lime_defconfig

diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
index e27698d0dd7df055b4c1439b218550d726f16ef8..d83fc2b4031d3c1ded4d4e8b0f57022f5fedd9a8 100644 (file)
--- a/configs/A20-OLinuXino-Lime_defconfig
+++ b/configs/A20-OLinuXino-Lime_defconfig
@@ -1,15 +1,26 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN7I=y
-CONFIG_DRAM_CLK=480
+CONFIG_DRAM_CLK=384
 CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
+CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPC(3)"
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
+CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_NET_ETHADDR_EEPROM=y
+CONFIG_NET_ETHADDR_EEPROM_I2C=y
+CONFIG_NET_ETHADDR_EEPROM_I2C_BUS=1
+CONFIG_I2C1_ENABLE=y
+CONFIG_SUN7I_GMAC=y
+CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y