# see the file Documentation/kbuild/kconfig-language.txt in the
# Linux kernel source tree.
#
-mainmenu "U-Boot $UBOOTVERSION Configuration"
+mainmenu "U-Boot $(UBOOTVERSION) Configuration"
-config UBOOTVERSION
- string
- option env="UBOOTVERSION"
+comment "Compiler: $(CC_VERSION_TEXT)"
+
+source "scripts/Kconfig.include"
# Allow defaults in arch-specific code to override any given here
source "arch/Kconfig"
This option is enabled by default for U-Boot.
+config OPTIMIZE_INLINING
+ bool "Allow compiler to uninline functions marked 'inline' in full U-Boot"
+ default n
+ help
+ This option determines if U-Boot forces gcc to inline the functions
+ developers have marked 'inline'. Doing so takes away freedom from gcc to
+ do what it thinks is best, which is desirable in some cases for size
+ reasons.
+
+config SPL_OPTIMIZE_INLINING
+ bool "Allow compiler to uninline functions marked 'inline' in SPL"
+ depends on SPL
+ default n
+ help
+ This option determines if U-Boot forces gcc to inline the functions
+ developers have marked 'inline'. Doing so takes away freedom from gcc to
+ do what it thinks is best, which is desirable in some cases for size
+ reasons.
+
+config TPL_OPTIMIZE_INLINING
+ bool "Allow compiler to uninline functions marked 'inline' in TPL"
+ depends on TPL
+ default n
+ help
+ This option determines if U-Boot forces gcc to inline the functions
+ developers have marked 'inline'. Doing so takes away freedom from gcc to
+ do what it thinks is best, which is desirable in some cases for size
+ reasons.
+
config CC_COVERAGE
bool "Enable code coverage analysis"
depends on SANDBOX
Enabling this option will pass "--coverage" to gcc to compile
and link code instrumented for coverage analysis.
+config CC_HAS_ASM_INLINE
+ def_bool $(success,echo 'void foo(void) { asm inline (""); }' | $(CC) -x c - -c -o /dev/null)
+
config DISTRO_DEFAULTS
bool "Select defaults suitable for booting general purpose Linux distributions"
select AUTO_COMPLETE
config NR_DRAM_BANKS
int "Number of DRAM banks"
+ default 1 if ARCH_SUNXI || ARCH_OWL
default 4
help
This defines the number of DRAM banks.
default 0x1000 if AM33XX
default 0x2800 if SANDBOX
default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \
- ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5)
+ ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \
+ ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \
+ ARCH_LS1046A || ARCH_QEMU)
default 0x400
help
Before relocation, memory is very limited on many platforms. Still,
When disabling this, please check if malloc calls, maybe
should be replaced by calloc - if one expects zeroed memory.
+config SYS_MALLOC_DEFAULT_TO_INIT
+ bool "Default malloc to init while reserving the memory for it"
+ default n
+ help
+ It may happen that one needs to move the dynamic allocation
+ from one to another memory range, eg. when moving the malloc
+ from the limited static to a potentially large dynamic (DDR)
+ memory.
+
+ If so then on top of setting the updated memory aside one
+ needs to bring the malloc init.
+
+ If such a scenario is sought choose yes.
+
config TOOLS_DEBUG
bool "Enable debug information for tools"
help
This option allows to build a ROM version of U-Boot.
The build process generally requires several binary blobs
which are not shipped in the U-Boot source tree.
- Please, see doc/README.x86 for details.
+ Please, see doc/arch/x86.rst for details.
config SPL_IMAGE
string "SPL image used in the combined SPL+U-Boot image"
default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
default "u-boot-elf.srec" if RCAR_GEN3
default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
- ARCH_SUNXI || RISCV)
- default "u-boot.kwb" if KIRKWOOD
+ ARCH_SUNXI || RISCV || ARCH_ZYNQMP)
+ default "u-boot.kwb" if ARCH_KIRKWOOD
default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
default "u-boot-with-spl.imx" if ARCH_MX6 && SPL
help
pointer values - up to 'MAX_ERRNO' bytes below this value must be
unused/invalid addresses.
+config PLATFORM_ELFENTRY
+ string
+ default "__start" if MIPS
+ default "_start"
+
endmenu # General setup
menu "Boot images"
help
Enable this to support SHA256 checksum of FIT image contents. A
SHA256 checksum is a 256-bit (32-byte) hash value used to check that
- the image contents have not been corrupted. SHA256 is recommended
- for use in secure applications since (as at 2016) there is no known
- feasible attack that could produce a 'collision' with differing
- input data. Use this for the highest security. Note that only the
- SHA256 variant is supported: SHA512 and others are not currently
- supported in U-Boot.
+ the image contents have not been corrupted.
+
+config FIT_ENABLE_SHA384_SUPPORT
+ bool "Support SHA384 checksum of FIT image contents"
+ default n
+ select SHA384
+ help
+ Enable this to support SHA384 checksum of FIT image contents. A
+ SHA384 checksum is a 384-bit (48-byte) hash value used to check that
+ the image contents have not been corrupted. Use this for the highest
+ security.
+
+config FIT_ENABLE_SHA512_SUPPORT
+ bool "Support SHA512 checksum of FIT image contents"
+ default n
+ select SHA512
+ help
+ Enable this to support SHA512 checksum of FIT image contents. A
+ SHA512 checksum is a 512-bit (64-byte) hash value used to check that
+ the image contents have not been corrupted.
config FIT_SIGNATURE
bool "Enable signature verification of FIT uImages"
depends on DM
select HASH
select RSA
+ select RSA_VERIFY
+ select IMAGE_SIGN_INFO
help
This option enables signature verification of FIT uImages,
using a hash signed and verified using RSA. If
Enable this to support the pss padding algorithm as described
in the rfc8017 (https://tools.ietf.org/html/rfc8017).
+config FIT_CIPHER
+ bool "Enable ciphering data in a FIT uImages"
+ depends on DM
+ select AES
+ help
+ Enable the feature of data ciphering/unciphering in the tool mkimage
+ and in the u-boot support of the FIT image.
+
config FIT_VERBOSE
bool "Show verbose messages when FIT images fail"
help
bool "Enable signature verification of FIT firmware within SPL"
depends on SPL_DM
select SPL_FIT
+ select SPL_CRYPTO_SUPPORT
+ select SPL_HASH_SUPPORT
select SPL_RSA
+ select SPL_RSA_VERIFY
+ select SPL_IMAGE_SIGN_INFO
config SPL_LOAD_FIT
bool "Enable SPL loading U-Boot as a FIT (basic fitImage features)"
particular it can handle selecting from multiple device tree
and passing the correct one to U-Boot.
+config SPL_LOAD_FIT_APPLY_OVERLAY
+ bool "Enable SPL applying DT overlays from FIT"
+ depends on SPL_LOAD_FIT
+ select OF_LIBFDT_OVERLAY
+ help
+ The device tree is loaded from the FIT image. Allow the SPL is to
+ also load device-tree overlays from the FIT image an apply them
+ over the device tree.
+
+config SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ
+ depends on SPL_LOAD_FIT_APPLY_OVERLAY
+ default 0x10000
+ hex "size of temporary buffer used to load the overlays"
+ help
+ The size of the area where the overlays will be loaded and
+ uncompress. Must be at least as large as biggest overlay
+ (uncompressed)
+
config SPL_LOAD_FIT_FULL
bool "Enable SPL loading U-Boot as a FIT (full fitImage features)"
select SPL_FIT
depends on SPL_FIT
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
+ default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP
default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV
help
Specifies a (platform specific) script file to generate the FIT
configuration to Kconfig. Since this option will be removed sometime,
new boards should not use this option.
-config SYS_TEXT_BASE
+config HAVE_SYS_TEXT_BASE
+ bool
depends on !NIOS2 && !XTENSA
depends on !EFI_APP
+ default y
+
+config SYS_TEXT_BASE
+ depends on HAVE_SYS_TEXT_BASE
default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3
default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
help
The address in memory that U-Boot will be running from, initially.
-
-
config SYS_CLK_FREQ
depends on ARC || ARCH_SUNXI || MPC83xx
int "CPU clock frequency"