configs: visionfive2: Enable MULTI_DTB_FIT for JH7110 based board DT

[J-u-boot.git] / configs / sama5d27_wlsom1_ek_qspiflash_defconfig

diff --git a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig
index 8106018e042dfb4c1eb2e57c1e7367e4e30b4ade..beab5d09db3a0f5cddfd289223be4378adaf71d4 100644 (file)
--- a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig
+++ b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig
@@ -13,21 +13,26 @@ CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d27_wlsom1_ek"
-CONFIG_SPL_TEXT_BASE=0x200000
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK=0x218000
+CONFIG_SPL_TEXT_BASE=0x200000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x20000000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf801c000
 CONFIG_DEBUG_UART_CLOCK=82000000
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_SYS_MONITOR_LEN=524288
+# CONFIG_EFI_LOADER_HII is not set
 CONFIG_FIT=y
 CONFIG_QSPI_BOOT=y
 CONFIG_SPI_BOOT=y
@@ -35,35 +40,30 @@ CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x21000000 0x60000 0xc000; sf read 0x22000000 0x6c000 0x394000; bootz 0x22000000 - 0x21000000"
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
 CONFIG_SPL_MAX_SIZE=0x10000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x20000000
-CONFIG_SPL_BSS_MAX_SIZE=0x80000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SPL_DISPLAY_PRINT=y
-# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
+# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
 CONFIG_SPL_AT91_MCK_BYPASS=y
 CONFIG_HUSH_PARSER=y
-CONFIG_SYS_CBSIZE=256
-CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_DM=y
-# CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y
+CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_HASH=y
@@ -91,7 +91,6 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ATMEL=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_BUS=2
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -129,4 +128,3 @@ CONFIG_W1=y
 CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y
 CONFIG_W1_EEPROM_DS24XXX=y
-# CONFIG_EFI_LOADER_HII is not set