configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / trimslice_defconfig

diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig
index d94a0b408b5749978a2645d4221fb43b67dee8ea..c04fc1a775261317931af95ca4b26f6cf08aa257 100644 (file)
--- a/configs/trimslice_defconfig
+++ b/configs/trimslice_defconfig
@@ -8,25 +8,24 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xFE000
 CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="tegra20-trimslice"
-CONFIG_SPL_TEXT_BASE=0x00108000
-CONFIG_SYS_PROMPT="Tegra20 (TrimSlice) # "
 CONFIG_SPL_STACK=0xffffc
+CONFIG_SPL_TEXT_BASE=0x00108000
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_TEGRA20=y
 CONFIG_TARGET_TRIMSLICE=y
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_PCI=y
 CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_SYS_PBSIZE=2087
 CONFIG_CONSOLE_MUX=y
 CONFIG_SYS_STDIO_DEREGISTER=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
-CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000
-CONFIG_SYS_SPL_MALLOC_SIZE=0x10000
-CONFIG_SYS_MAXARGS=64
-CONFIG_SYS_PBSIZE=2087
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x10000
+CONFIG_SYS_PROMPT="Tegra20 (TrimSlice) # "
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
@@ -35,7 +34,6 @@ CONFIG_CMD_PCI=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
 CONFIG_CMD_EXT4_WRITE=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
@@ -43,7 +41,6 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_ENV_SPI_MAX_HZ=48000000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SPL_DM=y
 CONFIG_SYS_I2C_TEGRA=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_RTL8169=y