Convert CONFIG_MISC_INIT_R to Kconfig

[J-u-boot.git] / include / configs / tao3530.h

diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index eb89e561514321efe614f04dcfabef2699f3dc79..556219bd9f925f86cbcb38e08f8aead7c3e46f63 100644 (file)
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the TechNexion TAO-3530 SOM
  * equipped on Thunder baseboard.
@@ -6,8 +7,6 @@
  * Tapani Utriainen <[email protected]>
  *
  * Copyright (C) 2013 Stefan Roese <[email protected]>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -24,8 +23,6 @@
 #define V_OSCK                 26000000        /* Clock output from T2 */
 #define V_SCLK                 (V_OSCK >> 1)
 
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -53,14 +50,12 @@
 /*
  * select serial console configuration
  */
-#define CONFIG_CONS_INDEX              3
 #define CONFIG_SYS_NS16550_COM3                OMAP34XX_UART3
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
 /* commands to include */
-#define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
 
 #define CONFIG_SYS_I2C
 #define CONFIG_I2C_MULTI_BUS
@@ -73,8 +68,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
-                                                       /* to access nand */
 #define CONFIG_SYS_NAND_BASE           NAND_BASE       /* physical address */
                                                        /* to access nand at */
                                                        /* CS0 */
@@ -137,13 +130,9 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
 
 /* turn on command-line edit/hist/auto */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
 
-#define CONFIG_SYS_ALT_MEMTEST         1
 #define CONFIG_SYS_MEMTEST_START       (0x82000000)            /* memtest */
                                                                /* defaults */
 #define CONFIG_SYS_MEMTEST_END         (0x83FFFFFF)            /* 64MB */
@@ -151,7 +140,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           (OMAP34XX_SDRC_CS0)     /* default */
                                                        /* load address */
-#define CONFIG_SYS_TEXT_BASE           0x80008000
 
 /*
  * OMAP3 has 12 GP timers, they can be driven by the system clock
@@ -164,7 +152,6 @@
 /*
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1           OMAP34XX_SDRC_CS0
 #define PHYS_SDRAM_1_SIZE      (32 << 20)      /* at least 32 MiB */
 #define PHYS_SDRAM_2           OMAP34XX_SDRC_CS1
@@ -205,7 +192,6 @@
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       162
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
 
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
@@ -243,7 +229,6 @@
  * older x-loader implementations. And move the BSS area so that it
  * doesn't overlap with TEXT_BASE.
  */
-#define CONFIG_SYS_TEXT_BASE           0x80008000
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000         /* 512 KB */