+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2001
* Denis Peter, MPL AG Switzerland
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _SCSI_H
#define _SCSI_H
-typedef struct SCSI_cmd_block{
+#include <asm/cache.h>
+#include <linux/dma-direction.h>
+
+struct udevice;
+
+struct scsi_cmd {
unsigned char cmd[16]; /* command */
/* for request sense */
unsigned char sense_buf[64]
unsigned long trans_bytes; /* tranfered bytes */
unsigned int priv;
-}ccb;
+ enum dma_data_direction dma_dir;
+};
/*-----------------------------------------------------------
**
#define SCSI_MED_REMOVL 0x1E /* Prevent/Allow medium Removal (O) */
#define SCSI_READ6 0x08 /* Read 6-byte (MANDATORY) */
#define SCSI_READ10 0x28 /* Read 10-byte (MANDATORY) */
+#define SCSI_READ16 0x48
#define SCSI_RD_CAPAC 0x25 /* Read Capacity (MANDATORY) */
#define SCSI_RD_CAPAC10 SCSI_RD_CAPAC /* Read Capacity (10) */
#define SCSI_RD_CAPAC16 0x9e /* Read Capacity (16) */
#define SCSI_WRITE_LONG 0x3F /* Write Long (O) */
#define SCSI_WRITE_SAME 0x41 /* Write Same (O) */
-
-/****************************************************************************
- * decleration of functions which have to reside in the LowLevel Part Driver
+/**
+ * struct scsi_plat - stores information about SCSI controller
+ *
+ * @base: Controller base address
+ * @max_lun: Maximum number of logical units
+ * @max_id: Maximum number of target ids
+ * @max_bytes_per_req: Maximum number of bytes per read/write request
*/
+struct scsi_plat {
+ unsigned long base;
+ unsigned long max_lun;
+ unsigned long max_id;
+ unsigned long max_bytes_per_req;
+};
+
+/* Operations for SCSI */
+struct scsi_ops {
+ /**
+ * exec() - execute a command
+ *
+ * @dev: SCSI bus
+ * @cmd: Command to execute
+ * @return 0 if OK, -ve on error
+ */
+ int (*exec)(struct udevice *dev, struct scsi_cmd *cmd);
+
+ /**
+ * bus_reset() - reset the bus
+ *
+ * @dev: SCSI bus to reset
+ * @return 0 if OK, -ve on error
+ */
+ int (*bus_reset)(struct udevice *dev);
+};
+
+#define scsi_get_ops(dev) ((struct scsi_ops *)(dev)->driver->ops)
+
+extern struct scsi_ops scsi_ops;
+
+/**
+ * scsi_exec() - execute a command
+ *
+ * @dev: SCSI bus
+ * @cmd: Command to execute
+ * @return 0 if OK, -ve on error
+ */
+int scsi_exec(struct udevice *dev, struct scsi_cmd *cmd);
-void scsi_print_error(ccb *pccb);
-int scsi_exec(ccb *pccb);
-void scsi_bus_reset(void);
-void scsi_low_level_init(int busdevfunc);
+/**
+ * scsi_bus_reset() - reset the bus
+ *
+ * @dev: SCSI bus to reset
+ * @return 0 if OK, -ve on error
+ */
+int scsi_bus_reset(struct udevice *dev);
+/**
+ * scsi_scan() - Scan all SCSI controllers for available devices
+ *
+ * @vebose: true to show information about each device found
+ */
+int scsi_scan(bool verbose);
-/***************************************************************************
- * functions residing inside cmd_scsi.c
+/**
+ * scsi_scan_dev() - scan a SCSI bus and create devices
+ *
+ * @dev: SCSI bus
+ * @verbose: true to show information about each device found
*/
-void scsi_init(void);
-void scsi_scan(int mode);
+int scsi_scan_dev(struct udevice *dev, bool verbose);
-/** @return the number of scsi disks */
-int scsi_get_disk_count(void);
+#ifndef CONFIG_DM_SCSI
+void scsi_low_level_init(int busdevfunc);
+void scsi_init(void);
+#endif
#define SCSI_IDENTIFY 0xC0 /* not used */