board: phytec: am62a7: Add PHYTEC phyCORE-AM62A7 SoM

[J-u-boot.git] / configs / evb-px30_defconfig

diff --git a/configs/evb-px30_defconfig b/configs/evb-px30_defconfig
index d75329d38517230fee1171790c712933e01cee1e..50dd29fcb01fa12149b0b9f400f40cddf86b3a51 100644 (file)
--- a/configs/evb-px30_defconfig
+++ b/configs/evb-px30_defconfig
@@ -2,27 +2,19 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00200000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000
-CONFIG_DEFAULT_DEVICE_TREE="px30-evb"
-CONFIG_SPL_TEXT_BASE=0x00000000
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-evb"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_PX30=y
+# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set
 CONFIG_TARGET_EVB_PX30=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
+# CONFIG_TPL_LIBCOMMON_SUPPORT is not set
 CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
-CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
-CONFIG_DEBUG_UART_BASE=0xFF160000
-CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_DEBUG_UART_BASE=0xff178000
+CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_DEBUG_UART=y
+# CONFIG_EFI_LOADER is not set
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -34,16 +26,12 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
 CONFIG_SPL_MAX_SIZE=0x20000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 # CONFIG_TPL_FRAMEWORK is not set
 # CONFIG_TPL_BANNER_PRINT is not set
+# CONFIG_TPL_SYS_MALLOC_SIMPLE is not set
 # CONFIG_CMD_BOOTD is not set
 # CONFIG_CMD_ELF is not set
 # CONFIG_CMD_IMI is not set
@@ -64,7 +52,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIVE=y
-CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_OF_SPL_REMOVE_PROPS="interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_REGMAP=y
@@ -115,4 +103,3 @@ CONFIG_SPL_TINY_MEMSET=y
 CONFIG_TPL_TINY_MEMSET=y
 CONFIG_LZO=y
 CONFIG_ERRNO_STR=y
-# CONFIG_EFI_LOADER is not set