sunxi: H6: Enable Ethernet on the Pine H64

[J-u-boot.git] / configs / P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig

diff --git a/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig b/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig
index 6e57ddf075f9da7736537eb6ba999aecf242a983..c1044520d7c4994164c4de6ff4d350598ffab1fb 100644 (file)
--- a/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig
+++ b/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig
@@ -1,6 +1,7 @@
 CONFIG_PPC=y
 CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_ENV_SIZE=0x2000
+CONFIG_NXP_ESBC=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB_PA=y
 # CONFIG_SYS_MALLOC_F is not set
@@ -29,13 +30,27 @@ CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
 CONFIG_DM=y
 CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_CFI=y
 CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_PHY_BROADCOM=y
+CONFIG_PHY_DAVICOM=y
+CONFIG_PHY_LXT=y
 CONFIG_PHY_MARVELL=y
-CONFIG_NETDEVICES=y
+CONFIG_PHY_NATSEMI=y
+CONFIG_PHY_REALTEK=y
+CONFIG_PHY_SMSC=y
+CONFIG_PHY_VITESSE=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
+CONFIG_MII=y
 CONFIG_TSEC_ENET=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y