menuconfig NET
bool "Networking support"
+ default y
if NET
+config ARP_TIMEOUT
+ int "Milliseconds before trying ARP again"
+ default 5000
+
+config NET_RETRY_COUNT
+ int "Number of timeouts before giving up"
+ default 5
+ help
+ This variable defines the number of retries for network operations
+ like ARP, RARP, TFTP, or BOOTP before giving up the operation.
+
+config PROT_UDP
+ bool "Enable generic udp framework"
+ help
+ Enable a generic udp framework that allows defining a custom
+ handler for udp protocol.
+
+config BOOTP_SEND_HOSTNAME
+ bool "Send hostname to DNS server"
+ help
+ Some DHCP servers are capable to do a dynamic update of a
+ DNS server. To do this, they need the hostname of the DHCP
+ requester.
+ If CONFIG_BOOTP_SEND_HOSTNAME is defined, the content
+ of the "hostname" environment variable is passed as
+ option 12 to the DHCP server.
+
config NET_RANDOM_ETHADDR
bool "Random ethaddr if unset"
- select LIB_RAND
help
- Selecting this will allow the Ethernet interface to function
- even when the ethaddr variable for that interface is unset.
- A new MAC address will be generated on every boot and it will
- not be added to the environment.
+ Selecting this will allow the Ethernet interface to function even
+ when the ethaddr variable for that interface is unset. In this case,
+ a random MAC address in the locally administered address space is
+ generated. It will be saved to the appropriate environment variable,
+ too.
config NETCONSOLE
bool "NetConsole support"
Support the 'nc' input/output device for networked console.
See README.NetConsole for details.
-config NET_TFTP_VARS
- bool "Control TFTP timeout and count through environment"
- default y
+config IP_DEFRAG
+ bool "Support IP datagram reassembly"
+ help
+ Selecting this will enable IP datagram reassembly according
+ to the algorithm in RFC815.
+
+config NET_MAXDEFRAG
+ int "Size of buffer used for IP datagram reassembly"
+ depends on IP_DEFRAG
+ default 16384
+ range 1024 65536
+ help
+ This defines the size of the statically allocated buffer
+ used for reassembly, and thus an upper bound for the size of
+ IP datagrams that can be received.
+
+config SYS_FAULT_ECHO_LINK_DOWN
+ bool "Echo the inverted Ethernet link state to the fault LED"
+ help
+ Echo the inverted Ethernet link state to the fault LED. Note, if
+ this option is active, then CONFIG_SYS_FAULT_MII_ADDR also needs to
+ be configured.
+
+config TFTP_BLOCKSIZE
+ int "TFTP block size"
+ default 1468
+ help
+ Default TFTP block size.
+ The MTU is typically 1500 for ethernet, so a TFTP block of
+ 1468 (MTU minus eth.hdrs) provides a good throughput with
+ almost-MTU block sizes.
+ You can also activate CONFIG_IP_DEFRAG to set a larger block.
+
+config TFTP_WINDOWSIZE
+ int "TFTP window size"
+ default 1
+ help
+ Default TFTP window size.
+ RFC7440 defines an optional window size of transmits,
+ before an ack response is required.
+ The default TFTP implementation implies a window size of 1.
+
+config TFTP_TSIZE
+ bool "Track TFTP transfers based on file size option"
+ depends on CMD_TFTPBOOT
+ default y if (ARCH_OMAP2PLUS || ARCH_K3)
+ help
+ By default, TFTP progress bar is increased for each received UDP
+ frame, which can lead into long time being spent for sending
+ data over the UART. Enabling this option, TFTP queries the file
+ size from server, and if supported, limits the progress bar to
+ 50 characters total which fits on single line.
+
+config SERVERIP_FROM_PROXYDHCP
+ bool "Get serverip value from Proxy DHCP response"
+ help
+ Allows bootfile config to be fetched from Proxy DHCP server
+ while IP is obtained from main DHCP server.
+
+config SERVERIP_FROM_PROXYDHCP_DELAY_MS
+ int "# of additional milliseconds to wait for ProxyDHCP response"
+ default 100
+ help
+ Amount of additional time to wait for ProxyDHCP response after
+ receiving response from main DHCP server. Has no effect if
+ SERVERIP_FROM_PROXYDHCP is false.
+
+config KEEP_SERVERADDR
+ bool "Write the server's MAC address to 'serveraddr'"
+ default y if SANDBOX
+ help
+ Keeps the server's MAC address, in the env 'serveraddr'
+ for passing to bootargs (like Linux's netconsole option). If this is
+ enabled, when an ARP reply is received, the server's IP address is
+ written there.
+
+config UDP_CHECKSUM
+ bool "Check the UDP checksum"
+ default y if SANDBOX
+ help
+ Enable this to verify the checksum on UDP packets. If the checksum
+ is wrong then the packet is discussed and an error is shown, like
+ "UDP wrong checksum 29374a23 30ff3826"
+
+config BOOTP_SERVERIP
+ bool "Use the 'serverip' env var for tftp, not bootp"
help
- If set, allows controlling the TFTP timeout through the
- environment variable tftptimeout, and the TFTP maximum
- timeout count through the variable tftptimeoutcountmax.
- If unset, timeout and maximum are hard-defined as 1 second
- and 10 timouts per TFTP transfer.
-
-config BOOTP_PXE_CLIENTARCH
- hex
- default 0x16 if ARM64
- default 0x15 if ARM
- default 0 if X86
-
-config BOOTP_VCI_STRING
- string
- default "U-Boot.armv7" if CPU_V7 || CPU_V7M
- default "U-Boot.armv8" if ARM64
- default "U-Boot.arm" if ARM
- default "U-Boot"
+ Enable this if the TFTP server will be the 'serverip' environment
+ variable, not the BOOTP server. This affects the operation of both
+ bootp and tftp.
endif # if NET
projects / J-u-boot.git / blobdiff