dm: core: Add flags parameter to device_remove()

[J-u-boot.git] / include / configs / xpedite517x.h

diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index 51781daa7f08c41d9c1e7df062dac0141e2b5790..d0041489507f9b990d1420bdd69b1e5f79462302 100644 (file)
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -14,7 +14,6 @@
 /*
  * High Level Configuration Options
  */
 /*
  * High Level Configuration Options
  */

-#define CONFIG_MPC8641         1       /* MPC8641 specific */

 #define CONFIG_XPEDITE5140     1       /* MPC8641HPCN board specific */
 #define CONFIG_SYS_BOARD_NAME  "XPedite5170"
 #define CONFIG_SYS_FORM_3U_VPX 1
 #define CONFIG_XPEDITE5140     1       /* MPC8641HPCN board specific */
 #define CONFIG_SYS_BOARD_NAME  "XPedite5170"
 #define CONFIG_SYS_FORM_3U_VPX 1


@@ -23,32 +22,25 @@
 #define CONFIG_BAT_RW          1       /* Use common BAT rw code */
 #define CONFIG_HIGH_BATS       1       /* High BATs supported and enabled */
 #define CONFIG_ALTIVEC         1
 #define CONFIG_BAT_RW          1       /* Use common BAT rw code */
 #define CONFIG_HIGH_BATS       1       /* High BATs supported and enabled */
 #define CONFIG_ALTIVEC         1

-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO

 
 #define        CONFIG_SYS_TEXT_BASE    0xfff00000
 
 
 #define        CONFIG_SYS_TEXT_BASE    0xfff00000
 

-#define CONFIG_PCI             1       /* Enable PCI/PCIE */
-#define CONFIG_PCI_PNP         1       /* do pci plug-and-play */

 #define CONFIG_PCI_SCAN_SHOW   1       /* show pci devices on startup */
 #define CONFIG_PCI_SCAN_SHOW   1       /* show pci devices on startup */

-#define CONFIG_PCIE1           1       /* PCIE controler 1 */
-#define CONFIG_PCIE2           1       /* PCIE controler 2 */
+#define CONFIG_PCIE1           1       /* PCIE controller 1 */
+#define CONFIG_PCIE2           1       /* PCIE controller 2 */

 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */

-#define CONFIG_FSL_LAW         1       /* Use common FSL init code */

 
 /*
  * DDR config
  */
 
 /*
  * DDR config
  */

-#define CONFIG_SYS_FSL_DDR2

 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #define SPD_EEPROM_ADDRESS1            0x54    /* Both channels use the */
 #define SPD_EEPROM_ADDRESS2            0x54    /* same SPD data         */
 #define SPD_EEPROM_OFFSET              0x200   /* OFFSET of SPD in EEPROM */
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #define SPD_EEPROM_ADDRESS1            0x54    /* Both channels use the */
 #define SPD_EEPROM_ADDRESS2            0x54    /* same SPD data         */
 #define SPD_EEPROM_OFFSET              0x200   /* OFFSET of SPD in EEPROM */

-#define CONFIG_NUM_DDR_CONTROLLERS     2

 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   1
 #define CONFIG_DDR_ECC
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   1
 #define CONFIG_DDR_ECC


@@ -81,7 +73,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */

-#define CONFIG_SYS_CCSRBAR_DEFAULT     0xff700000      /* CCSRBAR Default */

 #define CONFIG_SYS_CCSRBAR             0xef000000      /* relocated CCSRBAR */
 #define CONFIG_SYS_CCSRBAR_PHYS                CONFIG_SYS_CCSRBAR
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 #define CONFIG_SYS_CCSRBAR             0xef000000      /* relocated CCSRBAR */
 #define CONFIG_SYS_CCSRBAR_PHYS                CONFIG_SYS_CCSRBAR
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR


@@ -215,7 +206,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * Serial Port
  */
 #define CONFIG_CONS_INDEX              1
  * Serial Port
  */
 #define CONFIG_CONS_INDEX              1

-#define CONFIG_SYS_NS16550

 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)


@@ -223,22 +213,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 #define CONFIG_SYS_BAUDRATE_TABLE      \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 #define CONFIG_SYS_BAUDRATE_TABLE      \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}

-#define CONFIG_BAUDRATE                        115200

 #define CONFIG_LOADS_ECHO              1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
 #define CONFIG_LOADS_ECHO              1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 

-/*
- * Use the HUSH parser
- */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT               1
-#define CONFIG_OF_BOARD_SETUP          1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-

 /*
  * I2C
  */
 /*
  * I2C
  */


@@ -525,25 +502,19 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Command configuration.
  */
 /*
  * Command configuration.
  */

-#define CONFIG_CMD_ASKENV

 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DATE

-#define CONFIG_CMD_DHCP

 #define CONFIG_CMD_DS4510
 #define CONFIG_CMD_DS4510_INFO
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_DS4510
 #define CONFIG_CMD_DS4510_INFO
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM

-#define CONFIG_CMD_I2C

 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_JFFS2

-#define CONFIG_CMD_MII

 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PCA953X
 #define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PCI_ENUM
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PCA953X
 #define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PCI_ENUM

-#define CONFIG_CMD_PING

 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_REGINFO

-#define CONFIG_CMD_SNTP

 
 /*
  * Miscellaneous configurable options
 
 /*
  * Miscellaneous configurable options


@@ -556,11 +527,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 #define CONFIG_CMDLINE_EDITING 1               /* Command-line editing */
 #define CONFIG_LOADADDR                0x1000000       /* default location for tftp and bootm */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 #define CONFIG_CMDLINE_EDITING 1               /* Command-line editing */
 #define CONFIG_LOADADDR                0x1000000       /* default location for tftp and bootm */

-#define CONFIG_BOOTDELAY       3               /* -1 disables auto-boot */

 #define CONFIG_PANIC_HANG                      /* do not reset board on panic */
 #define CONFIG_PREBOOT                         /* enable preboot variable */
 #define CONFIG_PANIC_HANG                      /* do not reset board on panic */
 #define CONFIG_PREBOOT                         /* enable preboot variable */

-#define CONFIG_FIT             1
-#define CONFIG_FIT_VERBOSE     1

 #define CONFIG_INTEGRITY                       /* support booting INTEGRITY OS */
 
 /*
 #define CONFIG_INTEGRITY                       /* support booting INTEGRITY OS */
 
 /*


@@ -722,7 +690,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
        "osfile=/home/user/board.uImage\0"                              \
        "fdtfile=/home/user/board.dtb\0"                                \
        "ubootfile=/home/user/u-boot.bin\0"                             \
        "osfile=/home/user/board.uImage\0"                              \
        "fdtfile=/home/user/board.dtb\0"                                \
        "ubootfile=/home/user/u-boot.bin\0"                             \

-       "fdtaddr=c00000\0"                                              \
+       "fdtaddr=0x1e00000\0"                                           \

        "osaddr=0x1000000\0"                                            \
        "loadaddr=0x1000000\0"                                          \
        "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
        "osaddr=0x1000000\0"                                            \
        "loadaddr=0x1000000\0"                                          \
        "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \