Convert CONFIG_SYS_MALLOC_LEN to Kconfig

[J-u-boot.git] / include / configs / tam3517-common.h

diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 121de2bd2452c4ff0f4fd9db47273a3b73e155db..5fafee280b21447b27be5f1fb27c29a4d54d8ee4 100644 (file)
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -25,11 +25,6 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (128 << 10) + \
-                                       2 * 1024 * 1024)
 /*
  * DDR related
  */
@@ -51,16 +46,11 @@
  */
 #define CONFIG_SYS_NS16550_COM1                OMAP34XX_UART1
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
 /* EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       25
 
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50            /* base address */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1               /* bytes of address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW    0x07
 
 /*
@@ -80,13 +70,6 @@
 
 #define CONFIG_SYS_MAXARGS             32      /* max number of command */
                                                /* args */
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START       (OMAP34XX_SDRC_CS0)
-#define CONFIG_SYS_MEMTEST_END         (OMAP34XX_SDRC_CS0 + \
-                                       0x01F00000) /* 31MB */
-
-#define CONFIG_SYS_LOAD_ADDR           (OMAP34XX_SDRC_CS0) /* default load */
-                                                               /* address */
 
 /*
  * AM3517 has 12 GP timers, they can be driven by the system clock
@@ -110,11 +93,6 @@
 
 /* Redundant Environment */
 #define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
-#define CONFIG_ENV_OFFSET              0x180000
-#define CONFIG_ENV_ADDR                        0x180000
-#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
-                                               2 * CONFIG_SYS_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
@@ -127,9 +105,6 @@
  * ethernet support, EMAC
  *
  */
-#define CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
 
 /* Defines for SPL */
@@ -137,10 +112,6 @@
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SPL_NAND_WORKSPACE      0x8f07f000 /* below BSS */
 
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-
 #define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \
                                         CONFIG_SPL_TEXT_BASE)
 #define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
@@ -150,7 +121,6 @@
 #define CONFIG_SPL_BSS_START_ADDR      0x8f080000 /* end of RAM */
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 
 /* FAT */
@@ -267,7 +237,7 @@ struct tam3517_module_info {
 
 #define TAM3517_READ_EEPROM(info, ret) \
 do {                                                           \
-       i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); \
+       i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \
        if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,          \
                (void *)info, sizeof(*info)))                   \
                ret = 1;                                        \